1. 2. 3. 4. 5. 6. 7. 4. 8. 9. 10. 11. 1.Switch DVD / AV / TV 2.Switch USB / CARD 3.Setup 4.Vol +/ Vol – 5. : Previous Chapter / Next Channel Selection : Next Chapter / Previous Channel Selection 6.OK : Play (DVD) / Confirm your selection (ATSC ) 7. : Rewind / Left Navigation : Fast Forward / Right Navigation 8.Stop disc play 9.Accesses / Exits the setup menu 10.Play/Pause 11.
Remote Control Functions 1. 2. 3. 4. 5. 1 16 17 2 18 3 4 5 6 7 4 8 9 10 11 12 13 14 15 5 7 19 20 21 22 23 Switch DVD / TV / AV Numeric Keypad 0-9 Setup : accesses or exits the setup menu CH+/- : switch to the next / previous channel / : Navigation Vol -/+ : decrease / increase volume 6. Play ( DVD mode) Confirm your selection ( ATSC mode) 7. To navigate inside the menus. 8. Switch USB / Card ( DVD mode) Switch between Digital Radio and ATSC modes. 9.
Remove the plastic cover Turn on the power etc. or player then press ENTER. AV input/output VCD, DVD play/VCR Yellow Red white AV connect Ye llo w Re d wh it e Notice: Please turn off all devices before connection. As shown in the picture, use the A/V cable to connect the portable TV player with other devices. Switch the portable TV player to AV mode.
DVD Setup The setup menu consists of four sub-menus, General Setup, Audio Setup, Video Setup, and Preference Setup. Digital TV Setup If you are using the unit for the first time or have restored the unit to factory default, the installation guide menu will appear on your TV screen. USA (1) [OSD Language] press RIGHT/LEFT key to select a language. (2) [Country] press RIGHT/LEFT key to select your country of residence. (3) [Channel Search] press RIGHT or OK key to begin Automatic channel search.
supplied 9-12 volts AC adapter to the player and to the power outlet. The charge indicator turns red while charging, the charge indicator turns off when the battery is fully charged.The usage Power outlet Car Adapter car Caution! Do not use any other cords but the one supplied with your product. Voltage before connecting.
back To access the menu, press MENU and select [Search Channel] using the RIGHT/LEFT keys. This menu provides options to adjust the search channel settings. Press UP/DOWN to select an option and press RIGHT/LEFT to adjust the setting . Press EXIT to exit the menu. USA Singnal Type Air Auto Search will automatically search for channels and save them once the scanning is complete. All previously saved channels and settings will be deleted.
1 inch.