User`s guide

90 Appendix A: BIOS Set-up
Navigating in the BIOS
Phoenix SecureCore Tiano Setup
Main Advanced Security Boot Exit
F1 Help
Esc Exit
 Select Item +/- Change Values
Enter Select  Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Main
CPU Type Intel(R) Atom(TM) CPU N2600 @ 1.60GHz
CPU Speed 1.60 GHz
Installed Memory 2048 MB
System BIOS Version N26K_0.32.IA32
Build Date 10/10/2012
KBC Version 0.58
Serial Number SYN0000000000001
Asset Tag Number Asset Tag
UUID 00000000-0000-0000-0000000000000000
Product Name a7400
Manufacturer Name TabletKiosk
System Time [15:08:31]
System Date [10/12/2012]
To navigate in the BIOS, simple tap on the options you want
to select using either your nger or the stylus pen. Tap on the
navigation options at the bottom of the screen for pressing [F1],
[Esc], [Enter], [F9] or [F10]. You may also tap on the arrow symbols
to move up, down, left or right as well as on the +/- to change
values in selected elds.
NOTE: How you enter the BIOS, tapping with either your nger or
the digitizer stylus pen, is also how you will navigate in the BIOS. For
example, if you tapped the screen with your nger, then the BIOS will
activate with the touch screen and will only respond to your nger.
On a system with a dual mode screen, if you tapped with the digitizer
stylus, the BIOS will activate using the digitizer panel and only
respond to the stylus.
As with any standard PC, you can also navigate the BIOS by
plugging in a USB keyboard before powering on the system and
using the corresponding keys from the navigation legend.
The navigation legend at the bottom of the BIOS screen doubles as a control
pad when navigating the BIOS with either touch or the digitizer stylus.