User`s guide

92 Appendix A: BIOS Set-up
Advanced Menu
PXE LAN Boot
When enabled, system can boot from a network drive.
G-Sensor Enabled
When enabled screen will automatically rotate to match the
system orientation.
WebCam1
Enables and disables the front webcam.
WebCam2
Enables and disables the rear webcam.
AC-In Auto Boot
When enabled, system will automatically power on and boot-up
when the system is plugged in.
Phoenix SecureCore Tiano Setup
Main Advanced Security Boot Exit
F1 Help
Esc Exit
 Select Item +/- Change Values
Enter Select  Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Advanced
PXE LAN BOOT [Disabled]
G-Sensor Enable [Enabled]
WebCam1 [Enabled]
WebCam2 [Enabled]
AC-In Auto Boot [Disabled]
Boot-Up Num-Lock [Off]
Configure SATA as [AHCI]
Hardware Monitor
Battery Calibration

