D1301 Front Rear Audio Video Sys Exit Model:D1301
Thank you for buying this product, please read through these operating instructions, so you will know how to operate your model properly. after you have finished reading the instructions, put them away in a safe place for future reference .
PRECAUTIONS Notes on Installation The unit is designed for 12VDC,negative ground operation system only. Before installing the unit, make sure your vehicle is connected to DC12V negative ground system. Be sure to connect the color coded leads according to the diagram.Incorrect connections may cause the unit to malfunction or damage the vehicle, s electrical system. Be sure to connect the speaker (-) leads to the speaker (-) terminal.
PRECAUTIONS F This unit can play the following discs only: Type of disc Label on the disc Recorded material Size of disc Sound and moving pictures 12cm VCD Sound and moving pictures 12cm CD Sound only 12cm MP3 Sound only 12cm DVD TM V I D E O NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVCD disc. *Do not attempt to modify the unit, modifying the unit may cause an accident. *Stop the vehicle before carrying out any operation that could interfere with your driving.
FRONT PANEL 14 13 15 16 1 PTY TA MIC DISP AF OPEN REL VOL DN IR MUTE 2 UP 3 BAND/ SRC POWER 4 5 6 11 10 A/V IN 9 7 8 IR A/V IN 17 TILT MENU 18 6 12 18 19
FRONT PANEL 1.REL:Press to open the guardagainst theft front-panel. 2.VOL:Rotate VOL button clock wiseto increase the volume level; and rotate VOL button anticlockwise to decreasethe volume level. Press the button to select one of the audio control:L-front/R-front/L-rear/R-rear/Subwoof /Bass/Middle/Treble/TILT/Volume. Rotate the button to adjust the selecteditem 3. / / / :In radio mode, long press switches to manual seek station . Short press switches to automatic.
SYSTEM MENU The users can perform operationby touching screen directly. Radio Operation 1 2 3 1: 65.00M 2: 67.10M 3: 70.40M 4: 72.50M 5: 74.00M 6: 65.00M 65.00MHz 6 7 Page1 4 5 8 9 10 1. BACKLIGHT Turn on /off the backlight. (The function can be used to change the screen brightness while travelling at night) 2. SOURCE To display the SOURCE screen 3.
RDS Operation EON:OFF REG:OFF PTY:NONE 1 2 3 TA 65.00MHz PS: RT: PTY: AF PTY Seek- Seek+ Page2 4 5 1.TA To turn on /off TA function 2.AF To turn on /off AF function 3.PTY To switch RDS program type 4.Page2 To switch to radio operation page. 5.SEEK-/SEEK+ To seek a station automatically. To seek a station manually(long touch).
1.PLAY To start the playback. 2.PAUSE To pause the playback. 3.STOP To stop playing, touch twice to stop completely. 4.MENU To display the DVD SETUP screen. 5.PREV/NEXT To select previous/next chapter or tracks. NOTE:Touching the left middle position twice to display the TITLE MENU selection screen, touching the right middle position twice to display the ROOT MENU selection screen, ouching the right top position to display the number keyboard.
The phone book screen 4 3 1 2 1. To display a telephone number list of the received calls 2. To display a telephone number list of the dialed calls 3. To display a telephone number list of the received but you missed 4. To change the list page The Bluetooth Setup screen 1 2 3 4 6 7 5 8 1. To connect the Bluetooth deviece 2. to pair up the Bluetooth device. 3. To disconnect the Bluetooth device 4. To reset the unit if there is something wrong with the Bluetooth function. 5. Playback/pause 6.
TV Operation TV 0: 44.25 1: 55.75 2: 63.75 3: 77.25 4: 44.25 5: 115.25 Ant-1 1 CH- CH+ AMS 4 PAL-I CH:0 44.25Mz Seek- Seek+ 5 SYS 6 7 2 3 1.channel preset button To display the preset channel list Touch any one of the list to watch the TV which stored on the position Touch and hold any one of the list to stored the current channel frequency on the position 2.CH-/CH+ To switch the preset channel list downward or upward. 3.AMS To search and store channels automatically 4.
1.Front To display the source selection screen. Front Rear Audio Video Sys Exit Touch the item to select source displayed on the unit screen. 2.Rear To select a source which display on the rear monitor Front Rear Audio Video Sys Exit * It is unavailable in AUX or TV mode. * If another monitor(rear)is connected to the unit,image/audio of the rear monitor can be changed from the unit,so you can enjoy separate image/audio in the rear seats.
4.Video Press on the VIDEO button and the screen will display as following: Bright HUE Contrast Sharp Front Rear Audio SYS Video Exit In this menu, there are items of Bright, Hue, Contrast, Sharp can be adjusted. Touch on the item that need adjusted then touch on the button to adjust. 5.SYSTEM To display the system setup screen.Refer to system setup operation for detail 6.EXIT To return to current source screen.
Subwoof freq BassQ factor MidQ factor Front Rear Audio Video SYS Exit Touch the provided option to change the subwoof ,the bass and middle quality factor. Clock Adjust Night Lum Touch Adjust Front Rear Audio Video Sys Exit Clock Adjust Adjust the time by touch To select item your want to set(hour minute second) To change the display number Night Lum (dimmer)--in half-night mode The function to select the backlight brightness.
REMOTE CONTROL 15 16 1 2 3 4 17 5 6 7 8 18 19 20 9 21 10 PTY 11 12 13 14 AF TA 22 23 24 25 1.PWR/ 2. EQ/ 3. ANGLE/AMS 4. SUB-T/LOC 5. PROG/A-B 6. OSD/ 7. GOTO/ 8. MENU 9. [ / ][ / ][ / / / ]/ENTER 10. RPT 11. /PTY 12. ZOOM/AF 13. SRC/IR-SW 14. VOL-/SEL/VOL+ 15. 16. LOUD/ 17. 0-9 Number button 18. CLEAR 19. 20. TITLE 21. 22. BAND/P/N 23. SETUP 24. AUDIO/ST 25.
REMOTE CONTROL Installing the battery Slide the tray out on the back of the remote control and insert the battery with the plus (+)and minus(-)poles pointing in the proper direction. Use and care of the remote control Point the remote control in the direction of the front panel to operate to use it. Notes: Using batteries improperly can cause them to explode. Take note of the following points: * Keep the battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor.
REMOTE CONTROL 1 POWER/ Press the button to turn on the unit;Press and hold for 1second or longer to turn off the unit. In power on,press to mute the device. Press it again to resume previous sound level. 2 EQ/ Press to select the corresponding preset modes to adjust the sound quality. In bluetooth mode, press this button to dial up a call. 3 ANGLE/AMS Press to change the viewing angle in DVD mode;In radio mode, press to browse each stored station .Long press to scan and store station automatically.
11 /PTY In radio mode, press this button to switch to RDS program type. In DVD/VCD mode, press to play slowly 12 ZOOM/AF In radio mode, press this button to function AF on/off. In DVD/VCD mode, press to increase or decrease the picture in size. 13 SRC/IR-SW Press the button repeatedly to switch sources. Press and hold this button to change the IR to control front or rear source.(*It is disable when rear source shut off.) 14 VOL-/SEL/VOL+ Press VOL-/VOL+ to adjust volume.
BASIC OPERATION ¼ò¹ µÊ ¥Å ÕÅ ÏÖ ³¸ ýÄÏ 1.Reset the Unit Operating the unit for the first time or after replacing the car battery, you must reset the u nit. Press RESET button on the head unit with a pointed object, (such as a ballpoint pen) to set the unit to initial status. *This function can only be operated by the head unit. 2.Turning the Unit On/Off Press PWR/ button on the remote control to turn on the unit. N unit ON, when insert a disc, the unit will automatically start playing.
RADIO OPERATION Selecting the radio mode,the TFT display as the follow: 1: 65.00M 2: 67.10M 3: 70.40M 4: 72.50M 5: 74.00M 6: 65.00M 65.00MHz Page1 1.Band Selector In radio mode, repeatedly press BAND button on the remote control to select a band in the following order: FM1 FM3 FM2 MW2 MW1 *Pressing BAND on the touchable screen or on the panel also performs the same operation. 2.Manual/Automatic Tuning (1).
(2).It is switched to DX mode when Loc: OFF is pressed again. Both strong and weak stations can be received. Note: * The initial mode is DX mode. 6.MO/ST Selector In FM of radio mode, you can press ST button on the remote control to select Mono mode or Stereo mode. RDS (RADIO DATA SYSTEM) OPERATION The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically retune to a stronger transmitter that is broadcasting the same programme.
PTY(Programme Type)Tuning The PTY function allows you to search for stations with a particular Program Type. Touching Page1 button on the radio display screen to switch to the RDS screen EON:OFF REG:OFF 65.00MHz PTY:NONE PS: RT: TA PTY: AF PTY Seek- Seek+ Page2 1.Press PTY button on touchable screen or on the remote control to select a programme type. After selecting the programme type for 3 seconds, the unit will search for a station I n the selected programme type.
BLUETOOTH OPERATION HANDS-FREE PHONE The unit is compatible with Bluetooth international standard wireless cummunication technology.You can place a hands-free call by using a Bluetooth compatible with the mobile phone. *When you place a call,speak loudly and clearly. *Shut the windows before calling. *It is normal that some unnatural voice may be heard during your calling which may be caused by the conditions of the signals or the one who use the mobile phone.
Dialling a call 1. Input the number required by pressing number button on the remote control or on the screen then press button on the screen to dial up. The telephone number you dialed is appeared on the screen 2.Placing a call by history: Press button to switch to PHONE BOOK screen. You can place a call by selecting a person from a list of received calls dialed calls or missed calls. A maximum of 16 numbers can be stored in each call history.
BLUETOOTH AUDIO FUNCTION Audio information of a bluetooth compatible mobile phone,portable player,etc., Is by wireless controllable/playable from the unit. Refer to CONNECT to connect bluetooth audio devices. Refer to bluetooth setup(PAGE6) for operation *video playback is not supported.
TV OPERATIONS TV Selecting mode Press SRC button on the remote control, on the panel or source selection touchable screen to select TV mode. 4: 44.25 5: 115.25 TV 0: 44.25 1: 55.75 2: 63.75 3: 77.25 4: 44.25 5: 115.25 PAL-I Ant-1 CH- CH+ AMS CH:0 44.25Mz Seek- Seek+ SYS Searching a channel Automatic tuning: Press / buttons on the panel, or / buttons on the remote control or SEEK-/SEEK+ buttons on the touchable screen to start auto searching the channel downward or upward.
DVD/VCD/CD OPERATIONS Loading a disc 1.Press button to open the front panel 2. Insert a disc into the Disc slot the unit switch to the DVD mode automatically * You can eject a disc by pressing button on the unit Quick track selection fast forward/fast reward playback During playback mode, press / button to select next/previous chapter or track. *Press / button on the unit also perform the same operation. Press the / button on the remote control to perform fast reward or fast forward.
12 18 14 Normal Play 1 16 This function is operated by using the remote control. Increase or decrease the size of the picture During DVD/VCD playback, press ZOOM button to increase or decrease the picture size. There are 6 sizes, and press the button repeatedly to change the size in following order 2X OFF 14 3X 4X 12 13 *This function is operated by using the remote control.
Selecting different title (DVD mode) For DVD disc, you can press TITLE on the remote control to return the top menu of the disc, and you can select different chapter or title upward or downward by using or . *Touching the screen also perform the same function(refer to page 7 Multi-player operation for detail). Selecting root menu(DVD mode) For DVD disc, you can press MENU to select different root menus, and then press [ENTER] buttons to enter the sub-menus.
SYSTEM SETUP When you press SETUP button on the remote control,or press SETUP button on the screen, the setup menu will be displayed. It include General Setting,Audio Setup,Preference ,Password Setup and Exit Setup menu. 1.Within the setup menu, you can use [ ][ ][ ][ ] buttons on the remote control to move the cursor, and then press the ENTER button to make your selection.Press [ ] can return to the previous menu. 2.To exit setup menu, you can select the EXIT item in sub-menu or press SETUP button.
2. AUDIO SETUP PAGE User can select digital audio setup or dolby digital setup. AUDIO SETUP PAGE DIGITAL AUDIO DOLBY DIGITAL SETUP GO TO AUDIO SETUP PAGE 2.
PREFERENCE PAGE ENG AUDIO ENG SUBTITLE ENG DISC MENU PARENTAL DEFAULT ENGLISH FRENCH SPANISH PORTUGUES JAPANESE KOREAN RUSSIAN THAI PREFERRED AUDIO LANGUAGE 3.2 SUBTITLE SUBTITLE: Sets the preferred subtitle language as the default when playing DVD.(if DVD support these languages) PREFERENCE PAGE AUDIO ENG ENG SUBTITLE ENG DISC MENU PARENTAL DEFAULT ENGLISH FRENCH SPANISH PORTUGUES JAPANESE KOREAN RUSSIAN THAI PREFERRED SUBTITLE LANGUAGE 3.
PREFERENCE PAGE AUDIO ENG ENG SUBTITLE ENG DISC MENU PARENTAL DEFAULT RESET LOAD FACTORY SETTING 4. PASSWORD SETUP PAGE 4.1 PASSWORD MODE PASSWORD MODE: Sets the function operation to locking the parental function ON:Using the parental control must input the password OFF:You can not input the password to change the parental control. * The initial password is 136900 PASSWORD SETUP PAGE PASSWORD MODE PASSWORD ON ON OFF PASSWORD MODE 4.
SETTING THE TV SCREEN SIZE Multi-aspect ratio suit to different TV screen size. Picture format on Disc TV Screen Size 16:9 4:3 Pan Scan Letter-box Wide Screen 4:3 16:9 Function supported by DVD discs There are many functions available on DVD discs and the functions vary per player and per manufacturer.
MP3 OPERATION Playing a disc, an SD/MMC card or a USB device containing MP3 files Connect a USB device or insert a disc into the disc slot or SD/MMC card into the card slot. The unit will automatically switch on when a disc, card or USB device is inserted. The screen will display as follow: Touch this area to display numeric keypad. MP3 02:47 03:40 001/099 ..
Stop playing When playing MP3 files, press button on the remote control to stop playback. Pause playback Press the button on the remote control or press PAUSE button on the touchable screen while playing,press it again or press PLAY button on the touchable screen to return to normal playback.
IPOD OPERATION 1.Playing an IPOD device containing audio and vedio files Connect an IPOD device to the USB slot and the unit will automatically switch on to the USB interface. The screen will display as follow: Touch this area to display numeric keypad. 02:47 03:40 001/099 USB ..
INSTALLATION Notes Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up properly, and the unit and the system work properly. Use only the parts included with unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.
INSTALLATION Installation Method: DIN Front-Mount Bend these claws outward for a tight fit, if necessary. 1 2 3 4 Front Wall of the Cab To support the unit Detach the Unit 2. Insert the keys supplied to the unit at both sides of the unit (shown as illustrated) until they click. Pulling the keys makes it possible to remove the unit from the dashboard. 1. Take out the Outer Trim Frame.
TROUBLE SHOOTING Common problems Symptom Cause Remedy Power doesn't switch ON . The unit doesn't operate.
Problem during DVD playback Symptom Cause Remedy Playback is not possible The loaded disc has a different region number from this unit Replace the disc with one featuring the same region number as this unit Dialog language (and subtitle language) can not be switched. The DVD playing does not feature multiple language recordings.
CABLE CONNECTION 1 1 2 3 4 5 6 7 8 Black/black Plug RADIO SIGNAL INPUT Brown/yellow Plug REVERSE VIDEO IN Black/yellow Plug EXOTERIC VIDEO INPUT Gray/yellow Plug REAR VIDEO OUT Gray/yellow Plug REAR VIDEO OUT Blue/white Plug DUAL-AUDIO-OUT-L Blue/red Plug DUAL-AUDIO-OUT-R Orange/orange Plug DIGITAL AUDIO OUT 9 10 11 12 13 14 15 16 Deep gray/red Plug AUDIO OUT F.R Deep gray/white Plug AUDIO OUT F.L Black/red Plug AUX IN-R Black/white Plug AUX IN-L Shallow gray/red Plug AUDIO OUT R.
SPECIFICATION GENERAL power requirement ---------------------------------------------- 12VDC(10.
