Operation Manual

Selecting mode

Press SRC button on the remote control, on the panel or source selection touch-

able screen to select TV mode.

Searching a channel

Automatic tuning:

Press / buttons on the panel, or / buttons on the remote control or SEEK-/SEEK+

buttons on the touchable screen to start auto searching the channel downward or upward.

Manual tuning:

Press and hold repeatedly / buttons on the panel, / buttons on the remote control

or SEEK+/SEEK- buttons on the touchable screen to start manual searching the channel

downward or upward.

TV OPERATIONS

4: 44.25

5: 115.25

To Store a station automatically

Press and hold AMS button on the remote control or press AMS on the touchable screen .

The unit will search for channels and store them under preset numbers in order of signal

strength.

0: 44.25 1: 55.75

2: 63.75

4: 44.25

3: 77.25

5: 115.25

PAL-I

Ant-1 CH:0

44.25Mz

CH- CH+

AMS

SYS

Seek-

Seek+

Selecting channel

1.Press / on the remote control to select previous or next stored channel.

2.You can Press(1-9) number button directly on the remote control to select preset

channel. To select more than 10 channel number, firstly press GOTO button, then press

the corresponding number buttons.

3. Press the needed channel number on the touchable screen. To select a page containing

the needed channel number, press CH-/CH+ buttons on the screen.

Selecting TV system

Press repeatedly PAL-I button on the touchable screen to change the TV system for

different country.

Note:

When the TV channel picture is being broadcasted, touch the screen to

return to the TV mode menu. The TV mode menu will be concealed when

any operation is not performed within 5seconds.