SPECIFICATION: UNIT operating power............................................................................................ DC 13.8V Operating power range .............................................................................10.8-16V DC Maximum operating current.....................................................................................10A Weight.............................................................................................................1.75 KGS Ground system.............
WIRING DIAGRAM This product collocates ISO connector, please connnect correctly follw the instruction： Red-ACC ON(+12V) Grey/ Grey black-right front speaker anode/cathode Yellow-battery anode(+12V) Wite /White black-left front speaker anode/cathode Black-ground wire Green/Green black-left rear speaker anode/cathode Blue-power antenna control wire Green/Green black-left rear speaker anode/cathode Line output-white/red left/right track For Your Safety 1.
IMPORTANT SECURITY MEASURE This machine only adapts the follow disc: DISC CATEGORY DISC MARK DISC CONTENT DVD Sound and picture VCD Sound and picture CD MP3 The following table is helpful in solving the problems which possibly meet when using the unit. if problem cannot be solved,pls contact careerman or dealer. Do not repair the unit by yourself .That is danger. DISC SIZE 12CM PROBLEM 12CM Only sound 12CM Only sound 12CM Note: This unit is compatible with VCD1.0/1.1/2.0/3.0 DVCD disc.
Operation of RDS function In Radio mode,press the number button 7 once on the remote to change to TA mode,press 8 to change to AF mode,and press 9 to change to PTY mode. In other modes,press longer the number button 7 to change to TA mode,and press longer the 8 to change to AF mode: Note:this function can only be access by remote control.
7. Following the diagrammatic representation to insert the key to product to fit properly. Press the key at the side of product to pull out the product. DIN BACKWORD INSTALLATION Disassemble framework 8. Framework 9. Insert the loosing insert pin into the buttom hole of framework and full it out to disassemble framework. (When install framewoek, pls level the flute) Fix the product on the installation rack of wireless equipment. 10.
OSD In the VCD state, press APS button on the host to display the location and playing time of the current music being played. NUMBER BUTTON In VCD mode, press any number to input song. For example, you want to choose 16th song, press 10+ button, and then press 6 button once to play 16th song. Note: This function can only be worked by the remote control. REPEATEDLY PLAY In VCD mode, press 1(INT) number button on the unit to instantly play each song for 15 seconds. The song will twinkling on the display.
1. PWR Button Press this button to power on. Press it shortly to switch audio source mode. At AUX IN mode, press it longer to power off. 2. MUTE Button Press this button to shut off sound, press again to resume volume. 3. EQ Button Short press this button to select the preset equalizer playing mode: FLAT → ROCK → CLASS → POP 4.REL Button Press this button to release the panel. 5. MBP Button Press this button can start MBP function, it can make you enjoy the comfortable sound effects.
CD PROGRAM PLAY In CD mode, you can set the sequence of playing by the program function, the operation i s as follow: When CD is playing, press ST/PROG button, then the display shows: 9. 1/INT Button At radio state, press this button to select pre-saved frequency radio channels; At disc playing state, press this button to execute scanning & playing. 10.
21. SEEK – Button At radio state, short press this button to manually decrease modulation frequency; At disc playing state, short press this button to skip to the last music for playing and long press this button to execute fast rewind function. 22. Disc eject button Press this button to eject the disc. 23. USB Slot Connect the USB memory to this socket, and the unit can play music format files supported by this unit in the USB memory. 24.
SD CARD OPERATION In radio or audio mode, insert SD card, unit will read SD card and play automatically. If there is a card in the slot .please press SOURCE button to play.(NOTE: in power off mode,insert SD card, power will be turn on and read the card.) REMOTE CONTROL FUNCTION 4. SOURCE Button Press this button to choose audio sources.
15. 0-10+ Button Press this button lto choose desired song, section, preset stations. * Decimal numbers, for example the 19th song, press 1,9 button. * Centesimal numbers, for example, the 120th song, press 1,2,0 button. BATTERY CHANGE When control distance of remote control become shorter or no function, pls change battery. Pls confirm polarity before change. 18. AUDIO Button In DVD mode, press this button to switch language of dialogue.
DVD BASIC OPERATION VIDEO SETUP BRIGHTNESS CONTRAST HUE SATURATION SHARPENESS VIDEO SETUP BRIGHTNESS CONTRAST HUE SATURATION SHARPENESS Slot in DVD disc, unit will play it automatically. If disc is in slot, press SOURCE button to play. SPEED FORWARD/BACKWARD While playing, long press seek+ or seek- button to activate the fast forward of fast rewind fundction.
OSD In DVD mode, press the 1 number button on the unit to display all lthe informations of the disc. NOTE: It just can be worked by the APS button on unit. AUDIO SETUP DIGITAL KEY Note: when above lists appear ,press button and button to select your favor items, then press ENTER button save the format, press SETUP button to exite. SPDIF /OFF SPDIF/RAW SPDIF/PCW REPEATEDLY PLAY Press the RPT button on the remote control to startup the follow repeat functions.
MENU SELECT In the DVD state, press PBC button to return to the disc music menu, and then you can select music by using the cursor button. If you want to stop playing PBC, you can press PBC button to cancel PBC playing and start playing from the very beginning. After you select the favorite music and then press PLAY button /OK key for playing.
SYSTEM SETUP TV SYSTEM AUDIO PLAY VIDEO TY TYPE PASSWORD RATING DEFAULT PRESS VIDIO SETUP BRIGHTNESS CONTRAST HUE SATURATION SHARPNESS YSTEM SETUP SYSTEM SETUP TV SYSTEM AUDIO PLAY VIDEO TV TYPE PASSWORD RATING DEFAULT TV SYSTEM AUDIO PLAY VIDEO TV TYPE PASSWORD RATING DEFAULT EXIT SETUP EXIT SETUP INTERLACE-YUV SYSTEM SETUP TV SYSTEM AUDIO PLAY VIDEO TV TYPE PASSWORD RATING DEFAULT 1 KID SAFE 2G 3PG 4 PG13 5 PG-R 6R 7 NC-17 8 ADUL EXIT SETUP NOTE: THE OPERATEION ARE SAME AS ABOVE.
