Operation Manual

GPS Operation
4)This interface show all the Folders and execution files. You can copy the
different maps to the SD card and select the path which you choose, and then
press to make sure. Press and can preview page and next
page. Press exit.
5)Under the NaviSetting interface, press to save the setting.
PS: This production up to maps as Route66 Horizon PaPaGO Gate5 etc.
1.4.Calibrate
1)Press the Config Icon on the main menu and then enter into the system
Set-up functions.
2)Press the Calibrate Icon enter the calibration program.
3)According the system prompt click the screen exactly. If you want to exit, press
the Return button on the device.
1.5.Language
1)Press the Config Icon on the main menu and then enter into the system
Set-up functions.
2)Press the Icon enter the Language setting interface.Language
In this menu, can transform the system language into English, traditional Chinese
as well as simplified Chinese. Setting complete, press to save the setting
and press exit.
1.6.GPS Test
You can know the secondary planet and the orientation from this interface.
Click can exit.
2314
You can know the secondary planet and the orientation from this interface. Click
can exit.
REMOTE CONTROL OPERATION
Replacing the Battery
When the range of the operation of
the card remote control becomes
short or no function with a new
button cell.
1.Pull out the Battery Holder while
Pressing the Stopper .
2.Put the button-type battery(+) mark
upward into the Battery Holder.
3.Insert the Battery Holder into the
Remote Control.
Note: Some models are not equipped with
remote control. you should ignore
The contents about remote control.
Power Button
-- Press ( ) button to turn1
On/Off the power.
Pause/Play Button
-- Press ( ) button to suspend2
The playback of CD MP3 VCD
DVD. Press it again to return to
Normal playback mode.
Mute Button
-- Press ) button to cut off 3 (
the sound output, Press it again
to resume at the previous sound
Level.
Menu Button
-- Press 4 to select
Your desired menu. Then press
6 (ENTER) or press the play
Button 2 ( ) to confirm.
Note: This function works in main menu
mode only.
Band/System Switch
-- During radio mode, press 5
(BAND/SYS) to switch receiving
Band. Press and hold it, open the
LOUD function.
-- During playback mode, press
5 (BAND/SYS) button to swich
to AUTO PAL or NTSC system,
Press and hold it to open the LOUD
function.