Eon unit is easy to install. You will enjoy installing it by yourself to save time, effort and the huge amount of installation fee.
Take out the Eon head unit from the packing box. Use a Phillips screwdriver to remove the two screws on the top of the main unit which are used to fix the DVD Rom inside.
Test all features of the main unit (FM, DVD, SD, USB, Bluetooth, steering wheel controls, hand brake, before going to next step.
Open the glove box, pull the USB plug from the center console to the glove box through the gap between them, Sy
Place the microphone here. Stick the dash cam's camera on the windshield. Clip the microphone wherever you want that get the best voice reception.
Store the mic wire, GPS antenna, WiFi antenna, dash cam wire into the A Pillar. And then reinstall A Pillar Trim.
Place the GPS antenna and Mic as the picture shown. The wires should be led to the radio through A Pillar and the trim behind the steering wheel.
Pull the mic wire, GPS antenna, WiFi antenna, dash cam USB wire, reversing rear view wire to the center console.
Screw location Use two screws used for factory radio to fix Eon Head unit.
