M25/30 Manual Pallet Truck Tel: +86 573 8622 9999 Fax: +86 573 8622 2900 info@eoslift.
M25 / 30 Series Manual Pallet Trucks Esteemed users: For proper and safe operation of the products, before using the products, be sure to read the operating instructions carefully and retain them properly for future reference. The operator needs to have proficient operation skills. The operator has responsibility to carefully understand the performance and safety rules of the pallet truck. If you have any doubts during the application, please don't hesitate to contact Eoslift.
M25 / 30 Series Manual Pallet Trucks Table of contents Ⅰ.Technical parameters 01 Ⅱ.
Technical parameters Safety rules M25 / 30 Series Manual Pallet Trucks The truck is only applicable to indoor use and the application environment must meet the following conditions: Model M25/M30 Free from rainwater or corrosion of harmful gases; Room temperature of -20°C~+40°C; Rated capacity kg Load center mm Dead-weight kg 2500/3000 Relative ambient humidity <90%; and Requirements for ground: hard, anti-skid and level without barriers.
Adjusting the finger grip handle Installation of handles M25 / 30 Series Manual Pallet Trucks On the handle of this pallet truck, you can find finger grip control handle(1-1) which can be regulated in three positions : 1-1 Upper Middle Lower 1.Make sure the chain on the handle is in this position shown in the picture. 2.Push the handle shaft through the holes,Fix it with the spring pin.
Maintenance Transport, loading, test run and storage M25 / 30 Series Manual Pallet Trucks 1 The truck should be parked with the forks lowered to the min. height. 2 Check if the signs and warning labels on the truck are in place before using the truck each time. 3 Use original parts. 4 The waste liquid shall be place in special collection places for disposal. 5 Modifications or alterations to the truck, especially the safety device are prohibited.
M25 / 30 Series Manual Pallet Trucks Troubleshooting This chapter enables the user to identify and rectifies basic faults and the effects of incorrect operation. When trying to locate a fault, proceed in the order shown in the table below. If, after carrying out the following remedial action listed in “actions”, the truck cannot be restored to operation, contact the manufacturer’s after-sale service department.
M25 / 30 Series Manual Pallet Trucks Parts list · Frame NO. 1 2 3 4 Description WC02000001 Frame(2.5t,540×1150-85),5012 WC02000083 Frame(3.0t,540×1150-85),5012 Qty. NO. Parts number Description 1 13 WC02000177 Iron-core PU wheel φ200×50, bright red PU, black iron core WC02000485 Nylon wheel φ200 × 50, white (flower-shape wheel) Qty. 2 WC02000079 Frame(2.5t,685×1220-85),5012 14 WC02000003 Handle EOS-AC, black 1 WC02000086 Frame(3.
Parts list · Frame NO. Parts number 42 WE01000001 43 WE04000002 M25 / 30 Series Manual Pallet Trucks Parts list · Handle Description GB5780,Hexagon head bolt M10×65,galvanized GB889.1,Hexagon locking nut M10,galvanized GB6173,Hexagon thin nut M20×1.5,galvanized Qty. NO. Description 2 1 WJ10800014 Handle welded 1 2 2 WJ10800015 Clamping roller 1 WJ10800016 Parts number Qty.
Parts list · Handle Description NO. Parts number 1 WC02000157 Valve body welded(75), galvanized WC02000033 Valve body welded(85), galvanized Qty. 1 2 WC02000060 GB982, Combination sealing gasket 10 1 3 WC02000036 Screw 1 4 WC02000061 Seal ring UHS35 1 5 WC02000059 GB3452.1,O-ringφ34.5×3.
Parts list · Cylinder NO. 15 M25 / 30 Series Manual Pallet Trucks Parts list · Integrated valve Description Parts number Qty. 1 WC02000051 Push pin sleeve 1 2 WC02000065 GB3452.1,O-ringφ15.2×2.4 1 3 WC02000067 GB3452.1,O-ringφ8×1.8 2 4 WC02000053 Return valve sleeve 1 5 WC02000066 GB3452.1,O-ringφ9.5×1.
Parts list · Integrated valve 17 M25 / 30 Series Manual Pallet Trucks 18