SDS

Page 10 of 10
ATS Electronic Technology Co., Ltd
The packaging shall be adequate to avoid mechanical damage during transport, handling and stacking. The
materials and pack design shall be chosen so as to prevent the development of unintentional electrical
conduction, corrosion of the terminals and ingress of moisture.
The package must be handled with care and that a flammability hazard exists if the package is damaged;
With regard to transport, the following regulations are cited and considered:
- The International Civil Aviation Organization (ICAO) Technical Instructions.
- The International Air transport Association (IATA) Dangerous Goods Regulations.
UN Proper shipping name/Description (technical name): Battery, dry <Ni-MH battery >;
UN Classification (Transport hazard class): Non dangerous;
Marine pollutant(Y/N): N;
- The International Maritime Dangerous Goods (IMDG) Code.
For Nickel metal hydride batteries by sea, provided that packaging is strong and prevent the products from
short-circuit.
UN number of Nickel metal hydrogen battery: UN3496;
UN Proper shipping name/Description (technical name): Battery, dry <Ni-MH battery >;
UN Classification (Transport hazard class): Non dangerous;
Marine pollutant(Y/N): Y;
- The US Hazardous Materials Regulation (HMR) pursuant to a final rule issued by RSPA
- The Office of Hazardous Materials Safety within the US Department of Transportations’ (DOT) Research
and Special
Programs Administration (RSPA)
15. REGULATORY INFORMATION
Safety, health and environmental regulations/legislation specific for the substance or mixture
EU Regulation:
Authorisations: No information available.
Restrictions on use: No information available.
Regulatory information: No information available.
Chemical safety assessment
A Chemical Safety Assessment has not been carried out.
16. OTHER INFORMATION
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
--End of Sheet Safety Data Sheet--