Manual

The G23 is controlled under the Export Administration Regulations
(EAR) ECCN 0A987, and may not be exported to a foreign person, either
in the U.S. or abroad, without a license or exception from the U.S.
Department of Commerce.
After zeroing or re-zeroing the sight, it may be necessary to reposition the reticle image into
the center of the magnifier window. This is aesthetic in nature and has no affect on the sight’s
zero. Turn the horizontal and vertical adjustments on the top or side of the magnifier with the
adjustment tool provided or a flat head screwdriver to reposition reticle to the desired position.
Flip operation:
To flip the magnifier to the side, simply push down on the silver release lever. To close the
mount, push the magnifier back into its original position until the release lever catches.
INSTALLATION
To install the configured the magnifier onto the weapon, open the quick release lever. Place the
mount in the desired position behind the HWS. Once the mount is located in the desired
position, push the magnifier forward until the alignment tabs of the magnifier are set into the slot
located on the mount. Close the quick release lever.
RAIL COMPATIBILITY
Certain commercial variants of the mil-std-1913 rail specification may not be compatible with the
flip-to-side mount. The flip-to-side mount consists of an ARMS® throw lever and is only
adaptable to rails that properly accept the ARMS® design.
MAINTENANCE
Maintenance of the magnifier is limited to cleaning of the outside housing of the optic and
cleaning the lenses. The optical system is coated with anti-reflection material. When cleaning the
glass surfaces, first blow away any dirt and dust. Fingerprints and lubricants can be wiped off
with lens tissue or a soft cotton cloth which is moistened with lens cleaning fluid or glass cleaner,
sold in any camera store. Never clean the glass surface with a dry cloth or paper towel; always
dampen the glass surfaces prior to cleaning.
Visit us on the web……………………………………………………….....www.L-3com.com/EOTech
EMAIL……………………………………………………………..……………[e-mail]
Never disassemble your magnifier
! The optical cavity is purged, nitrogen filled, and
sealed to achieve fog proof performance. Disassembly will void the warranty and damage
the sight.
Warranty and Service Department.…………………………………………………… [phone]
If the flip action of the Flip to Side mount begins to stick from wear, use a common spray
lubricant on the hinge portion of the mount. No other maintenance is needed on the Flip to Side
Mount other than cleaning the surface. Please follow the same guidelines when cleaning the
magnifiers.
No maintenance is needed on the magnifier’s surface, except to occasionally wipe off with a
soft cloth. Use only a water-based cleaner such as glass cleaner, ammonia, or soap and water.
Never use any solvent-type cleaner such as alcohol or acetone.
L-3 EOTech warrants every product to be free from defects in materials and workmanship for a
period of two years from the original date of purchase. L-3 EOTech will promptly repair or
replace, at its option, any product that is defective in material or workmanship, without charge.
All costs associated with the product shipment for product repair will be incurred by the owner.
This warranty does not cover defects caused by improper handling, unauthorized disassembly,
installation, or maintenance; abnormal use; or unapproved alterations. L-3 EOTech shall not, in
any event, be liable for any damages, including any lost profits, lost savings, or other incidental
or consequential damages arising out of the use or inability to use such products. See L-3
EOTech’s Standard Terms and Conditions for complete details.
Shipping Address: L-3 Communications EOTech, Inc.
1201 E. Ellsworth Rd.
Ann Arbor, MI 48108
USA
FACTORY CONTACTS
WARRANTY
Eye Piece
Objective Lens
Quick Release Lever
Flip Release
Lever
Quick Release
Lever
Vertical Position Adjustment
Horizontal Position
Adjustment
Flip
Release
Lever
Objective Lens
RELEASED