Operator's Manual

CAUTION
• Never disassemble the sight’s optical assembly. The optical cavity is purged, nitro-
gen filled, and sealed to achieve fog resistant performance. Disassembly will void
the warranty and render the sight inoperable.
• When a sudden increase in resistance is felt in the elevation or windage adjustment
shafts, the end of the adjustment range has been reached. DO NOT TURN THE
ADJUSTMENTS ANY FARTHER OR SERIOUS DAMAGE MAY OCCUR TO THE
SIGHT.
• Never clean the glass surface with a dry cloth or paper towel; always dampen the
glass surfaces prior to cleaning
• All moving parts of the sight are permanently lubricated. Do not try to lubricate them.
• Do not use deteriorated or corroded batteries. Inspect batteries for rips, tears, dents,
or cuts in the housing. If there is any exposed, internal content of the battery, it could
affect the operation of the sight.
• The XPS2 HWS units are designed to mount directly to either a 1”(25.4mm) weav-
er or MIL-STD-1913 rail specification.