Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32520 ... B32529 Date: April 2015 © EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company.
Metallized polyester film capacitors (MKT) B32520 ... B32529 General purpose (stacked/wound) Typical applications Blocking Coupling, decoupling Bypassing RFI for automotive Dimensional drawing Climatic Max. operating temperature: 125 °C Climatic category (IEC 60068-1): 55/125/56 Construction Dielectric: polyethylene terephthalate (polyester, PET) Stacked-film technology for lead spacing 5 to 15 mm = code C, D or E in digit 7 of ordering code Wound capacitor technology for lead spacing 10 to 37.
B32520 ... B32529 General purpose (stacked/wound) Overview of available types Lead spacing 5.0 mm 7.5 mm 10.0 mm Type B32529 B32520 B32521 Page 6 9 Technology s s s VR (V DC) 50 63 100 250 400 630 63 100 250 400 63 100 250 400 630 VRMS (V AC) 32 40 63 63 63 s s s s 160 200 400 40 10 s s s s 160 200 40 CR (µF) 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.
B32520 ... B32529 General purpose (stacked/wound) Overview of available types Lead spacing 15.0 mm 22.5 mm 27.5 mm Type B32522 B32523 B32524 Page 12 14 Technology s s/w s/w s VR (V DC) 63 100 250 400 450 630 63 100 250 400 630 63 100 250 400 630 VRMS (V AC) 40 63 63 63 w s w 160 200 200 200 40 15 w w w w w 160 200 200 40 CR (µF) 0.047 0.068 0.10 0.15 0.22 0.33 0.39 0.47 0.56 0.68 1.0 1.5 2.2 3.3 4.7 6.
B32520 ... B32529 General purpose (stacked/wound) Overview of available types Lead spacing 37.5 mm Type B32526 Page 17 Technology w w w w VR (V DC) 63 100 250 400 VRMS (V AC) 40 63 160 200 CR (µF) 3.3 4.7 5.6 6.8 8.2 10 15 22 33 47 56 68 82 100 150 220 Technology: s = Stacked-film technology / w = Wound capacitor technology Please read Cautions and warnings and Important notes at the end of this document.
B32529 General purpose (stacked) Ordering codes and packing units (lead spacing 5 mm) VR V DC 50 63 100 VRMS CR f ≤60 Hz V AC µF 32 3.3 4.7 40 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 63 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 Max. dimensions w×h×l mm 7.8 × 13.0 × 7.8 7.8 × 13.0 × 7.8 2.5 × 6.5 × 7.3 2.5 × 6.5 × 7.3 2.5 × 6.5 × 7.3 2.5 × 6.5 × 7.3 2.5 × 6.5 × 7.3 2.5 × 6.5 × 7.3 2.5 × 6.5 × 7.3 2.5 × 6.5 × 7.
B32529 General purpose (stacked) Ordering codes and packing units (lead spacing 5 mm) VR V DC 100 250 VRMS CR f ≤60 Hz V AC µF 63 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 160 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 Max. dimensions w×h×l mm 2.5 × 6.5 × 7.3 2.5 × 6.5 × 7.3 2.5 × 6.5 × 7.3 2.5 × 6.5 × 7.3 2.5 × 6.5 × 7.3 3.0 × 6.5 × 7.3 3.5 × 8.0 × 7.3 3.5 × 8.0 × 7.3 4.5 × 9.5 × 7.3 6.0 × 10.5 × 7.5 7.8 × 13.0 × 7.8 2.5 × 6.
B32529 General purpose (stacked) Ordering codes and packing units (lead spacing 5 mm) VR V DC 400 630 VRMS CR f ≤60 Hz V AC µF 200 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 400 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 Max. dimensions w×h×l mm 2.5 × 6.5 × 7.3 2.5 × 6.5 × 7.3 2.5 × 6.5 × 7.3 2.5 × 6.5 × 7.3 2.5 × 6.5 × 7.3 2.5 × 6.5 × 7.3 3.0 × 6.5 × 7.3 3.0 × 6.5 × 7.3 3.5 × 8.0 × 7.3 4.5 × 9.5 × 7.3 4.5 × 9.5 × 7.3 6.0 × 10.5 × 7.
B32520 General purpose (stacked) Ordering codes and packing units (lead spacing 7.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 63 40 0.47 0.68 1.0 1.5 2.2 100 63 0.15 0.22 0.33 0.47 0.68 1.0 250 160 0.068 0.10 0.15 0.22 400 200 0.015 0.022 0.033 0.047 0.068 0.10 0.15 Max. dimensions w×h×l mm 3.0 × 8.0 × 10.0 4.0 × 8.5 × 10.0 5.0 × 10.5 × 10.0 5.0 × 10.5 × 10.0 6.0 × 12.0 × 10.3 3.0 × 8.0 × 10.0 3.0 × 8.0 × 10.0 4.0 × 8.5 × 10.0 5.0 × 10.5 × 10.0 6.0 × 12.0 × 10.3 6.0 × 12.0 × 10.3 3.0 × 8.0 × 10.0 4.0 × 8.
B32521 General purpose (stacked/wound) Ordering codes and packing units (lead spacing 10 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 63 40 0.47 0.68 1.0 1.5 2.2 3.3 100 63 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 250 160 0.010 0.015 0.022 0.033 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.33 0.47 Max. dimensions w×h×l mm 4.0 × 7.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 7.
B32521 General purpose (stacked/wound) Ordering codes and packing units (lead spacing 10 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 400 200 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 630 200 0.010 0.015 0.022 0.033 Max. dimensions w×h×l mm 4.0 × 7.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 7.0 × 13.0 4.0 × 9.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.0 4.0 × 9.0 × 13.0 5.0 × 11.0 × 13.0 5.0 × 11.0 × 13.0 6.0 × 12.0 × 13.
B32522 General purpose (stacked/wound) Ordering codes and packing units (lead spacing 15 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 63 40 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 100 63 0.33 0.47 0.68 1.0 1.0 1.5 1.5 2.2 2.2 3.3 3.3 4.7 4.7 6.8 250 160 0.10 0.15 0.22 0.33 0.39 0.47 0.56 ∇ ∇ ∇ ∇ ∇ Max. dimensions w×h×l mm 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 6.0 × 11.0 × 18.0 7.0 × 12.5 × 18.0 8.5 × 14.5 × 18.0 9.0 × 17.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.
B32522 General purpose (stacked/wound) Ordering codes and packing units (lead spacing 15 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 250 160 0.68 1.0 1.0 ∇ 1.5 1.5 ∇ 2.2 400 200 0.047 0.068 0.10 0.15 0.22 0.33 0.39 0.47 0.56 0.68 1.0 450 200 0.10 ∇ 0.15 ∇ 0.22 ∇ 0.33 ∇ 0.47 ∇ 0.68 ∇ 1.0 ∇ 630 200 0.047 0.068 0.10 0.15 0.22 Max. dimensions w×h×l mm 7.0 × 12.5 × 18.0 8.5 × 14.5 × 18.0 8.5 × 14.5 × 18.0 9.0 × 17.5 × 18.0 9.0 × 17.5 × 18.0 11.0 × 18.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.0 × 10.5 × 18.0 5.
B32523 General purpose (wound) Ordering codes and packing units (lead spacing 22.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 63 40 3.3 4.7 6.8 10 15 22 100 63 1.5 2.2 3.3 4.7 6.8 10 15 250 160 0.47 0.68 1.0 1.5 2.2 3.3 400 200 0.22 0.33 0.47 0.68 1.0 1.5 630 200 0.10 0.15 0.22 0.33 0.47 0.68 Max. dimensions w×h×l mm 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 7.0 × 16.0 × 26.5 10.5 × 16.5 × 26.5 12.0 × 22.0 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 6.0 × 15.0 × 26.5 7.0 × 16.0 × 26.5 8.5 × 16.
B32524 General purpose (wound) Ordering codes and packing units (lead spacing 27.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 63 40 4.7 6.8 10 15 22 33 47 68 100 100 63 4.7 6.8 10 15 22 33 47 68 250 160 1.5 2.2 3.3 4.7 6.8 10 15 15 15 22 33 Max. dimensions w×h×l mm 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 12.5 × 21.5 × 31.5 18.0 × 27.5 × 31.5 18.0 × 27.5 × 31.5 22.0 × 36.5 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.
B32524 General purpose (wound) Ordering codes and packing units (lead spacing 27.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 400 200 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 630 220 0.33 0.47 0.68 1.0 1.5 2.2 Max. dimensions w×h×l mm 11.0 × 19.0 × 31.5 11.0 × 19.0 × 31.5 11.0 × 19.0 × 31.5 11.0 × 21.0 × 31.5 14.0 × 24.5 × 31.5 14.0 × 24.5 × 31.5 18.0 × 27.5 × 31.5 22.0 × 36.5 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 11.0 × 21.0 × 31.5 14.0 × 24.5 × 31.5 18.0 × 27.5 × 31.5 21.0 × 31.0 × 31.
B32526 General purpose (wound) Ordering codes and packing units (lead spacing 37.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 63 40 22 33 47 56 68 82 100 150 220 100 63 15 22 33 33 47 47 68 100 150 250 160 4.7 6.8 10 15 15 22 22 33 47 68 Max. dimensions w×h×l mm 12.0 × 22.0 × 41.5 12.0 × 22.0 × 41.5 12.0 × 22.0 × 41.5 24.0 × 15.0 × 41.5 16.0 × 28.5 × 41.5 24.0 × 19.0 × 41.5 18.0 × 32.5 × 41.5 20.0 × 39.5 × 41.5 28.0 × 42.5 × 41.5 12.0 × 22.0 × 41.5 12.0 × 22.0 × 41.5 14.0 × 25.0 × 41.5 24.0 × 15.0 × 41.5 16.
B32526 General purpose (wound) Ordering codes and packing units (lead spacing 37.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 400 200 3.3 4.7 5.6 6.8 8.2 10 15 22 Max. dimensions w×h×l mm 12.0 × 22.0 × 41.5 12.0 × 22.0 × 41.5 24.0 × 15.0 × 41.5 14.0 × 25.0 × 41.5 24.0 × 19.0 × 41.5 18.0 × 32.5 × 41.5 20.0 × 39.5 × 41.5 28.0 × 42.5 × 41.
B32520 ... B32529 General purpose (stacked/wound) Technical data Operating temperature range Max. operating temperature Top,max Upper category temperature Tmax Lower category temperature Tmin Rated temperature TR Dissipation factor tan δ (in 10-3) at at 20 °C (upper limit values) Insulation resistance Rins or time constant τ = CR Rins at 20 °C, rel.
B32520 ... B32529 General purpose (stacked/wound) Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt values Lead spacing 5 mm 7.
B32520 ... B32529 General purpose (stacked/wound) Impedance Z versus frequency f (typical values) Please read Cautions and warnings and Important notes at the end of this document.
B32529 General purpose (stacked) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 5 mm 50 V DC/32 V AC 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC Please read Cautions and warnings and Important notes at the end of this document.
B32529 General purpose (stacked) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 5 mm 400 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document.
B32520 General purpose (stacked) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 7.5 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document.
B32521 General purpose (stacked/wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document.
B32521 General purpose (stacked/wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm 630 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document.
B32522 General purpose (stacked/wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document.
B32522 General purpose (stacked/wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm 450 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document.
B32523 General purpose (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 22.5 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document.
B32523 General purpose (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 22.5 mm 630 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document.
B32524 General purpose (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 27.5 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document.
B32524 General purpose (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 27.5 mm 630 V DC/220 V AC Please read Cautions and warnings and Important notes at the end of this document.
B32526 General purpose (wound) Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 37.5 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document.
B32520 ... B32529 General purpose (stacked/wound) Mounting guidelines 1 Soldering 1.1 Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C).
B32520 ... B32529 General purpose (stacked/wound) Immersion depth 2.0 +0/ 0.5 mm from capacitor body or seating plane Shield Heat-absorbing board, (1.5 ±0.5) mm thick, between capacitor body and liquid solder Evaluation criteria: Visual inspection ∆C/C0 tan δ Please read Cautions and warnings and Important notes at the end of this document.
B32520 ... B32529 General purpose (stacked/wound) 1.3 General notes on soldering Permissible heat exposure loads on film capacitors are primarily characterized by the upper category temperature Tmax. Long exposure to temperatures above this type-related temperature limit can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical characteristics.
B32520 ... B32529 General purpose (stacked/wound) Cautions and warnings Do not exceed the upper category temperature (UCT). Do not apply any mechanical stress to the capacitor terminals. Avoid any compressive, tensile or flexural stress. Do not move the capacitor after it has been soldered to the PC board. Do not pick up the PC board by the soldered capacitor. Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified lead spacing.
B32520 ... B32529 General purpose (stacked/wound) Topic Safety information Soldering Do not exceed the specified time or temperature limits during soldering. Cleaning Use only suitable solvents for cleaning capacitors. Embedding of When embedding finished circuit assemblies in capacitors in plastic resins, chemical and thermal influences finished assemblies must be taken into account.
B32520 ...
B32520 ...
B32520 ...
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.
Important notes 7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.
