Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32560 ... B32564 Date: May 2009 © EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.
Metallized polyester film capacitors (MKT) B32560 ... B32564 General purpose (stacked) SilverCapTM Typical applications SMPS, converter Electronic ballasts Compact fluorescent lamps (CFL) Ignition Dimensional drawing Climatic Max.
B32560 ... B32564 General purpose (stacked) SilverCapTM Overview of available types Lead spacing 7.5 mm 10.0 mm 15.0 mm Type B32560 B32561 B32562 Page 5 7 9 VR (V DC) 63 100 250 400 630 1000 63 100 250 400 630 100 250 400 630 VRMS (V AC) 40 63 63 160 200 400 500 40 CR (µF) 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.
B32560 ... B32564 General purpose (stacked) SilverCapTM Overview of available types Lead spacing 22.5 mm 27.5 mm Type B32563 B32564 Page 10 VR (V DC) 100 250 400 100 250 400 420 VRMS (V AC) 63 160 200 63 160 200 200 11 CR (µF) 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 Please read Cautions and warnings and Important notes at the end of this document.
B32560 General purpose (stacked) SilverCapTM Ordering codes and packing units (lead spacing 7.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 63 40 1.0 1.5 2.2 3.3 4.7 100 63 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 250 160 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 Max. dimensions w×h×l mm 4.0 × 6.8 × 9.0 5.1 × 7.6 × 9.0 6.5 × 8.2 × 9.0 8.5 × 9.1 × 9.0 9.8 × 11.0 × 9.0 2.5 × 5.1 × 9.0 2.7 × 5.7 × 9.0 3.4 × 6.1 × 9.0 4.2 × 6.5 × 9.0 5.5 × 7.0 × 9.0 6.7 × 8.2 × 9.0 8.5 × 9.2 × 9.0 9.5 × 11.0 × 9.0 2.5 × 5.2 × 9.0 2.
B32560 General purpose (stacked) SilverCapTM Ordering codes and packing units (lead spacing 7.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 400 200 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 630 400 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 1000 500 0.0022 0.0033 0.0047 Max. dimensions w×h×l mm 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 2.5 × 5.5 × 9.0 2.6 × 6.
B32561 General purpose (stacked) SilverCapTM Ordering codes and packing units (lead spacing 10 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 63 40 1.0 1.5 2.2 3.3 4.7 6.8 100 63 0.68 1.0 1.5 2.2 3.3 250 160 0.10 0.15 0.22 0.33 0.47 0.68 1.0 400 200 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 Max. dimensions w×h×l mm 3.5 × 6.2 × 11.0 4.3 × 6.9 × 11.0 5.1 × 7.9 × 11.0 6.4 × 9.1 × 11.0 7.3 × 11.0 × 11.0 8.8 × 12.7 × 11.0 3.6 × 6.3 × 11.5 4.5 × 6.9 × 11.5 5.6 × 7.8 × 11.5 6.9 × 9.0 × 11.5 7.8 × 10.5 × 11.5 2.8 × 5.
B32561 General purpose (stacked) SilverCapTM Ordering codes and packing units (lead spacing 10 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 630 350 0.015 0.022 0.033 0.047 0.068 0.10 0.15 Max. dimensions w×h×l mm 2.8 × 6.3 × 11.0 3.4 × 6.9 × 11.0 4.2 × 7.6 × 11.0 5.3 × 8.0 × 11.0 6.3 × 9.0 × 11.0 7.3 × 11.4 × 11.0 8.8 × 13.3 × 11.0 Ordering code (composition see below) B32561J8153+*** B32561J8223+*** B32561J8333+*** B32561J8473+*** B32561J8683+000 B32561J8104+000 B32561J8154+000 Ammo pack pcs.
B32562 General purpose (stacked) SilverCapTM Ordering codes and packing units (lead spacing 15 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 100 63 2.2 3.3 4.7 6.8 10 250 160 0.47 0.68 1.0 1.5 2.2 3.3 400 200 0.22 0.33 0.47 0.68 1.0 1.5 630 350 0.22 0.33 0.47 Max. dimensions w×h×l mm 4.9 × 8.0 × 16.5 6.0 × 9.3 × 16.5 7.3 × 10.6 × 16.5 9.0 × 11.8 × 16.5 11.8 × 13.0 × 16.5 5.0 × 6.7 × 16.5 6.0 × 7.8 × 16.5 7.0 × 9.3 × 16.5 8.7 × 11.0 × 16.5 10.7 × 12.8 × 16.5 13.9 × 14.5 × 16.5 4.7 × 7.5 × 16.5 6.0 × 8.3 × 16.5 7.
B32563 General purpose (stacked) SilverCapTM Ordering codes and packing units (lead spacing 22.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 100 63 6.8 10 15 22 250 160 2.2 3.3 4.7 400 200 1.0 1.5 2.2 Max. dimensions w×h×l mm 7.0 × 10.5 × 24.0 8.6 × 12.2 × 24.0 10.9 × 14.0 × 24.0 12.8 × 17.2 × 24.0 8.3 × 11.2 × 24.0 10.1 × 13.5 × 24.0 12.2 × 15.5 × 24.0 8.3 × 11.2 × 24.0 10.3 × 13.2 × 24.0 12.6 × 15.5 × 24.
B32564 General purpose (stacked) SilverCapTM Ordering codes and packing units (lead spacing 27.5 mm) VR VRMS CR f ≤60 Hz V DC V AC µF 100 63 10 15 22 33 250 160 3.3 4.7 6.8 10 400 200 1.5 2.2 3.3 4.7 420 200 4.7 6.8 Max. dimensions w×h×l mm 7.6 × 11.0 × 29.0 9.1 × 13.5 × 29.0 11.0 × 16.0 × 29.0 13.0 × 19.8 × 29.0 7.9 × 14.0 × 29.0 9.6 × 15.8 × 29.0 11.9 × 18.0 × 29.0 13.8 × 22.5 × 29.0 7.8 × 14.2 × 29.0 9.6 × 16.4 × 29.0 12.2 × 18.8 × 29.0 14.2 × 22.8 × 29.0 16.0 × 20.0 × 29.0 16.0 × 20.0 × 29.
B32560 ... B32564 General purpose (stacked) SilverCapTM Technical data Operating temperature range Max. operating temperature Top,max Upper category temperature Tmax Lower category temperature Tmin Rated temperature TR Dissipation factor tan δ (in 10-3) at at 20 °C (upper limit values) CR ≤ 0.1 µF 0.1 µF < CR ≤ 1 µF 1 kHz 8 8 10 kHz 15 15 100 kHz 30 VR CR ≤ 0.33 µF ≤ 100 V DC 3750 MΩ ≥ 250 V DC 7500 MΩ Insulation resistance Rins or time constant τ = CR Rins at 20 °C, rel.
B32560 ... B32564 General purpose (stacked) SilverCapTM Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor.
B32560 ... B32564 General purpose (stacked) SilverCapTM Impedance Z versus frequency f (typical values) Please read Cautions and warnings and Important notes at the end of this document.
B32560 General purpose (stacked) SilverCapTM Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 7.5 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document.
B32560 General purpose (stacked) SilverCapTM Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 7.5 mm 630 V DC/400 V AC Please read Cautions and warnings and Important notes at the end of this document.
B32561 General purpose (stacked) SilverCapTM Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document.
B32561 General purpose (stacked) SilverCapTM Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm 630 V DC/350 V AC Please read Cautions and warnings and Important notes at the end of this document.
B32562 General purpose (stacked) SilverCapTM Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC 630 V DC/350 V AC Please read Cautions and warnings and Important notes at the end of this document.
B32563 General purpose (stacked) SilverCapTM Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 22.5 mm 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document.
B32564 General purpose (stacked) SilverCapTM Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 27.5 mm 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC 420 V DC/200 V AC Please read Cautions and warnings and Important notes at the end of this document.
B32560 ... B32564 General purpose (stacked) SilverCapTM Mounting guidelines 1 Soldering 1.1 Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C).
B32560 ... B32564 General purpose (stacked) SilverCapTM Immersion depth 2.0 +0/ 0.5 mm from capacitor body or seating plane Shield Heat-absorbing board, (1.5 ±0.5) mm thick, between capacitor body and liquid solder Evaluation criteria: Visual inspection ∆C/C0 tan δ Please read Cautions and warnings and Important notes at the end of this document.
B32560 ... B32564 General purpose (stacked) SilverCapTM 1.3 General notes on soldering Permissible heat exposure loads on film capacitors are primarily characterized by the upper category temperature Tmax. Long exposure to temperatures above this type-related temperature limit can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical characteristics.
B32560 ...
B32560 ... B32564 General purpose (stacked) SilverCapTM 3 Embedding of capacitors in finished assemblies In many applications, finished circuit assemblies are embedded in plastic resins. In this case, both chemical and thermal influences of the embedding ("potting") and curing processes must be taken into account.
B32560 ... B32564 General purpose (stacked) SilverCapTM Cautions and warnings Do not exceed the upper category temperature (UCT). Do not apply any mechanical stress to the capacitor terminals. Avoid any compressive, tensile or flexural stress. Do not move the capacitor after it has been soldered to the PC board. Do not pick up the PC board by the soldered capacitor. Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified lead spacing.
B32560 ... B32564 General purpose (stacked) SilverCapTM Topic Safety information Soldering Do not exceed the specified time or temperature limits during soldering. Cleaning Use only suitable solvents for cleaning capacitors. Embedding of When embedding finished circuit assemblies in capacitors in plastic resins, chemical and thermal influences finished assemblies must be taken into account.
B32560 ...
B32560 ...
B32560 ...
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.
