Datasheet

B43510, 5-pin snap-in terminals, PVC insulation
Dimensions
(mm)
Approx.
weight (g)
Packing
units (pcs.)
d +1 l ±2
50 40 117 28
50 50 148 28
50 60 176 28
50 70 204 28
50 80 234 28
50 90 263 28
50 100 292 28
Standard snap-in terminals:
length (6.3 ±1) mm.
Also available with length of (4.5 1) mm.
All pin holes must be drilled into the PC-board,
since the unconnected pin serves as mounting.
This pin must be soldered to an isolated pad or a
pad with the same potential as the negative pole.
B43510, 5-pin snap-in terminals, PVC insulation and PET insulation cap on terminal side
Dimensions (mm) Approx.
weight (g)
Packing
units (pcs.)
d +1 l +2.2/2
50 40 117 28
50 50 148 28
50 60 176 28
50 70 204 28
50 80 234 28
50 90 263 28
50 100 292 28
Standard snap-in terminals:
length (6.3 +1/1.4) mm. Also available with
length of (4.5 1.4) mm. PET insulation cap is
positioned under the insulation sleeve.
All pin holes must be drilled into the PC-board,
since the unconnected pin serves as mounting.
This pin must be soldered to an isolated pad or a
pad with the same potential as the negative pole.
B43510, B43520
Compact  85 °C
Page 6 of 23Please read Cautions and warnings and
Important notes at the end of this document.