Datasheet

3) Chip thickness depends on the resistance value.
1.3 Reel packing
Packing survey
Case
size
Chip
thick-
ness
3)
8-mm tape Reel dimensions Packing units
mm mm pcs./reel
Blister Card-
board
A Tol. W1 Tol. W2 180-mm
reel
330-mm
reel
0402 0.5 x 180 3/+0 8.4 +1.5/0 14.4 max. 10000 
0603 0.8 x 180 3/+0 8.4 +1.5/0 14.4 max. 4000 
330 ±2.0 12.4 +1.5/0 18.4 max.  16000
0805 0.8 x 180 3/+0 8.4 +1.5/0 14.4 max. 4000 16000
1.2 x
330 ±2.0 12.4 +1.5/0 18.4 max.
3000 12000
1206
0.8 x 180 2/+0 8.4 +1.5/0 14.4 max. 4000 
1.2 x 180 2/+0 8.4 +1.5/0 14.4 max. 2000 
2 Packing codes
The last two digits of the complete ordering code state the packing mode:
Last two digits
60 SMD Cardboard tape 180-mm reel packing
62 SMD Blister tape 180-mm reel packing
70 SMD Cardboard tape 330-mm reel packing
72 SMD Blister tape 330-mm reel packing
Temperature measurement and compensation B57164K
Leaded NTC thermistors, lead spacing 5 mm K164
Page 13 of 30Please read Cautions and warnings and
Important notes at the end of this document.