NTC thermistors for temperature measurement Leaded NTC thermistors, lead spacing 5 mm Series/Type: B57164K Date: February 2009 © EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.
Temperature measurement and compensation B57164K Leaded NTC thermistors, lead spacing 5 mm Applications Temperature measurement and compensation K164 Dimensional drawing Features Wide resistance range Cost-effective Lacquer-coated thermistor disk Tinned copper leads Lead spacing 5 mm Marked with resistance and tolerance Delivery mode Bulk (standard), cardboard tape, reeled or in Ammo pack on request Dimensions in mm Approx. weight 0.4 g General technical data Climatic category Max.
Temperature measurement and compensation B57164K Leaded NTC thermistors, lead spacing 5 mm K164 Electrical specification and ordering codes R25 Ω 15 22 33 47 68 100 150 220 330 470 680 1k 1.5 k 2.2 k 3.3 k 4.7 k 6.8 k 10 k 15 k 22 k 33 k 47 k 68 k 100 k 150 k 220 k 330 k 470 k No.
Temperature measurement and compensation B57164K Leaded NTC thermistors, lead spacing 5 mm K164 Reliability data Test Standard Storage in dry heat IEC 60068-2-2 Storage in damp heat, steady state Rapid temperature cycling Endurance Long-term stability (empirical value) Test conditions Storage at upper category temperature T: 125 °C t: 1000 h IEC Temperature of air: 40 °C 60068-2-78 Relative humidity of air: 93% Duration: 21 days IEC Lower test temperature: 55 °C 60068-2-14 Upper test temperature:
Temperature measurement and compensation B57164K Leaded NTC thermistors, lead spacing 5 mm K164 R/T characteristics R/T No. T (°C) 1011 1012 1013 B25/100 = 3730 K B25/100 = 4300 K B25/100 = 3900 K RT/R25 α (%/K) RT/R25 α (%/K) RT/R25 α (%/K) 55.0 50.0 45.0 40.0 35.0 70.014 49.906 36.015 26.296 19.411 6.9 6.7 6.4 6.2 6.0 87.237 62.264 44.854 32.599 23.893 6.8 6.7 6.5 6.3 6.1 77.285 54.938 39.507 28.722 21.099 7.0 6.7 6.5 6.3 6.1 30.0 25.0 20.0 15.0 10.0 14.479 10.903 8.2923 6.
Temperature measurement and compensation B57164K Leaded NTC thermistors, lead spacing 5 mm K164 R/T characteristics R/T No. T (°C) 1014 1203 1302 B25/100 = 4250 K B25/100 = 2900 K B25/100 = 3000 K RT/R25 α (%/K) RT/R25 α (%/K) RT/R25 α (%/K) 55.0 50.0 45.0 40.0 35.0 83.935 60.228 43.593 31.815 23.404 6.8 6.6 6.4 6.3 6.1 30.0 25.0 20.0 15.0 10.0 17.349 12.946 9.7439 7.3737 5.6247 6.0 5.8 5.7 5.5 5.4 8.4216 6.7001 5.3757 4.3443 3.5376 4.7 4.5 4.3 4.2 4.1 8.9067 7.0357 5.6065 4.
Temperature measurement and compensation B57164K Leaded NTC thermistors, lead spacing 5 mm K164 R/T characteristics R/T No. T (°C) 55.0 50.0 45.0 40.0 35.0 1303 1305 1306 B25/100 = 3050 K B25/100 = 3200 K B25/100 = 3450 K RT/R25 α (%/K) RT/R25 α (%/K) RT/R25 α (%/K) 34.363 25.827 19.635 15.089 11.712 5.8 5.6 5.4 5.2 5.0 42.131 31.129 23.273 17.592 13.438 6.2 5.9 5.7 5.5 5.3 49.935 36.64 27.18 20.37 15.416 6.3 6.1 5.9 5.7 5.5 30.0 25.0 20.0 15.0 10.0 9.1774 7.2552 5.7835 4.6467 3.
Temperature measurement and compensation B57164K Leaded NTC thermistors, lead spacing 5 mm K164 R/T characteristics R/T No. T (°C) 1307 2005 2006 B25/100 = 3560 K B25/100 = 4600 K B25/100 = 5000 K RT/R25 α (%/K) RT/R25 α (%/K) RT/R25 α (%/K) 55.0 50.0 45.0 40.0 35.0 51.115 38.3 28.847 21.842 16.627 5.7 5.7 5.6 5.5 5.4 30.0 25.0 20.0 15.0 10.0 12.725 9.7859 7.5902 5.8918 4.6124 5.3 5.2 5.1 5.0 4.8 22.746 16.49 12.071 8.8455 6.5446 6.6 6.4 6.3 6.1 6.0 28.272 19.997 14.292 10.35 7.
Temperature measurement and compensation B57164K Leaded NTC thermistors, lead spacing 5 mm K164 R/T characteristics R/T No. T (°C) 55.0 50.0 45.0 40.0 35.0 2007 2903 2904 B25/100 = 4830 K B25/100 = 4200 K B25/100 = 4300 K RT/R25 α (%/K) RT/R25 α (%/K) RT/R25 α (%/K) 185.87 123.23 82.888 56.544 39.061 8.4 8.1 7.8 7.6 7.3 120.03 82.38 57.248 40.255 28.627 7.7 7.4 7.2 7.0 6.7 121.46 84.439 59.243 41.938 29.947 7.4 7.2 7.1 6.9 6.7 30.0 25.0 20.0 15.0 10.0 27.321 19.326 13.823 10.001 7.
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm Please read Cautions and warnings and Important notes at the end of this document.
Temperature measurement and compensation B57164K Leaded NTC thermistors, lead spacing 5 mm K164 R/T characteristics R/T No. T (°C) 4001 4003 B25/100 = 3950 K B25/100 = 4450 K RT/R25 α (%/K) RT/R25 α (%/K) 55.0 50.0 45.0 40.0 35.0 88.052 61.65 43.727 31.395 22.802 7.3 7.0 6.8 6.5 6.3 30.0 25.0 20.0 15.0 10.0 16.742 12.367 9.2353 7.0079 5.3654 6.2 6.0 5.6 5.4 5.4 20.142 14.801 10.976 8.1744 6.1407 6.2 6.1 5.9 5.8 5.7 5.0 0.0 5.0 10.0 15.0 4.126 3.2 2.4986 1.9662 1.5596 5.2 5.0 4.
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm Please read Cautions and warnings and Important notes at the end of this document.
Temperature measurement and compensation B57164K Leaded NTC thermistors, lead spacing 5 mm K164 Taping and packing 1 Taping of radial leaded NTC thermistors Dimensions and tolerances Lead spacing F = 2.5 mm and 5.0 mm (taping to IEC 60286-2) Dimensions (mm) b s d P0 P1 F ∆h ∆p W W0 W1 W2 H H0 H1 D0 t L L1 Lead spacing 2.5 mm 11.0 5.0 0.5/0.6 12.7 5.1 2.5 0 0 18.0 5.5 9.0 3.0 18.0 16.0 32.2 4.0 0.9 11.0 4.0 Lead spacing 5 mm 11.5 6.0 0.5/0.6 12.7 3.85 5.0 0 0 18.0 5.5 9.0 3.0 18.0 16.0 32.2 4.0 0.
Temperature measurement and compensation B57164K Leaded NTC thermistors, lead spacing 5 mm K164 Types of packing Ammo packing Ammo type x y z I 80 240 210 Packing unit: 1000 - 2000 pcs./reel Reel packing Packing unit: 1000 - 2000 pcs./reel Reel dimensions (in mm) Reel type d f n w I 360 max. 31 ±1 approx. 45 54 max. II 500 max. 23 ±1 approx. 59 72 max. Please read Cautions and warnings and Important notes at the end of this document.
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm B57164K K164 Cassette packing Packing unit: 1000 - 2000 pcs./cassette Bulk packing The components are packed in cardboard boxes, the size of which depends on the order quantity. Please read Cautions and warnings and Important notes at the end of this document.
Temperature measurement and compensation B57164K Leaded NTC thermistors, lead spacing 5 mm 2 K164 Packing codes The last two digits of the complete ordering code state the packing mode: Last two digits 00, 01, 02, 03,04, 05, 06, 07, 08 Bulk 40 Bulk 45 Bulk 50 Radial leads, kinked Cardboard tape Cassette packing 51 Radial leads, kinked Cardboard tape 360 or 500-mm reel packing 52 Radial leads, straight Cardboard tape Cassette packing 53 Radial leads, straight Cardb
Temperature measurement and compensation B57164K Leaded NTC thermistors, lead spacing 5 mm K164 Mounting instructions 1 Soldering 1.1 Leaded NTC thermistors Leaded thermistors comply with the solderability requirements specified by CECC. When soldering, care must be taken that the NTC thermistors are not damaged by excessive heat. The following maximum temperatures, maximum time spans and minimum distances have to be observed: Dip soldering Iron soldering Bath temperature max. 260 °C max.
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm B57164K K164 Bending strength: Test Ub: Two 90°-bends in opposite directions at a weight of 0.25 kg. Torsional strength: Test Uc: severity 2 The lead is bent by 90° at a distance of 6 to 6.5 mm from the thermistor body. The bending radius of the leads should be approx. 0.75 mm. Two torsions of 180° each (severity 2).
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm B57164K K164 The components should be left in the original packing. Touching the metallization of unsoldered thermistors may change their soldering properties.
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm B57164K K164 Cautions and warnings General See "Important notes" at the end of this document. Storage Store thermistors only in original packaging. Do not open the package prior to storage. Storage conditions in original packaging: storage temperature 25 °C ... +45 °C, relative humidity ≤75% annual mean, <95% maximum 30 days per annum, dew precipitation is inadmissible.
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm B57164K K164 Mounting Ensure that no thermo-mechanical stress occurs due to production processes (curing or overmolding processes) when thermistors are sealed, potted or overmolded or during their subsequent operation. The maximum temperature of the thermistor must not be exceeded. Ensure that the materials used (sealing/potting compound and plastic material) are chemically neutral.
Temperature measurement and compensation B57164K Leaded NTC thermistors, lead spacing 5 mm K164 Symbols and terms Symbol English German A AWG Area American Wire Gauge Fläche Amerikanische Norm für Drahtquerschnitte B B25/100 B value B value determined by resistance measurement at 25 °C and 100 °C B-Wert B-Wert, ermittelt durch Widerstandsmessungen bei 25 °C und 100 °C Cth Heat capacitance Wärmekapazität I Current Strom N Number (integer) Anzahl (ganzzahliger Wert) P25 Pdiss Pel Pmax M
Temperature measurement and compensation B57164K Leaded NTC thermistors, lead spacing 5 mm K164 Symbol English German α Temperature coefficient Temperaturkoeffizient ∆ Tolerance, change Toleranz, Änderung δth Dissipation factor Wärmeleitwert τc τa Thermal cooling time constant Thermal time constant Thermische Abkühlzeitkonstante Thermische Zeitkonstante Abbreviations / Notes Symbol English German Surface-mounted devices Oberflächenmontierbares Bauelement * To be replaced by a number
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.
