Datasheet

3) Chip thickness depends on the resistance value.
1.3 Reel packing
Packing survey
Case
size
Chip
thick-
ness
3)
8-mm tape Reel dimensions Packing units
mm mm pcs./reel
Blister Card-
board
A Tol. W1 Tol. W2 180-mm
reel
330-mm
reel
0402 0.5 x 180 3/+0 8.4 +1.5/0 14.4 max. 10000 
0603 0.8 x 180 3/+0 8.4 +1.5/0 14.4 max. 4000 
330 ±2.0 12.4 +1.5/0 18.4 max.  16000
0805 0.8 x 180 3/+0 8.4 +1.5/0 14.4 max. 4000 16000
1.2 x
330 ±2.0 12.4 +1.5/0 18.4 max.
3000 12000
1206
0.8 x 180 2/+0 8.4 +1.5/0 14.4 max. 4000 
1.2 x 180 2/+0 8.4 +1.5/0 14.4 max. 2000 
2 Packing codes
The last two digits of the complete ordering code state the packing mode:
Last two digits
60 SMD Cardboard tape 180-mm reel packing
62 SMD Blister tape 180-mm reel packing
70 SMD Cardboard tape 330-mm reel packing
72 SMD Blister tape 330-mm reel packing
Temperature measurement and compensation B57891M
Leaded NTC thermistors, lead spacing 2.5 mm M891
Page 11 of 28Please read Cautions and warnings and
Important notes at the end of this document.