PTC thermistors as limit temperature sensors Leaded disks, coated, miniaturized Series/Type: B59008 Date: March 2014 © EPCOS AG 2014. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.
Sensors Limit temp. sensors, leaded disks, coated, miniaturized Applications Limit temperature monitoring C8 Dimensional drawing Features Tinned leads Marked with coded sensing temperature Characteristics for sensing temperatures Tsense = 90 to 160 °C conform with DIN 44081 Extremely fast response due to small dimensions UL approval to UL 1434 (file number E69802) RoHS-compatible Delivery mode Bulk (standard) Dimensions in mm General technical data Max. operating voltage Max.
Sensors Limit temp. sensors, leaded disks, coated, miniaturized C8 Reliability data Test Electrical endurance, constant Damp heat Standard IEC 60738-1 Rapid change of temperature IEC 60738-1 Vibration IEC 60738-1 IEC 60738-1 Please read Cautions and warnings and Important notes at the end of this document.
Sensors Limit temp. sensors, leaded disks, coated, miniaturized Characteristics (typical) PTC resistance RPTC versus PTC temperature TPTC (measured at low signal voltage) Please read Cautions and warnings and Important notes at the end of this document.
Sensors Limit temp. sensors, leaded disks, coated, miniaturized C8 Cautions and warnings General EPCOS thermistors are designed for specific applications and should not be used for purposes not identified in our specifications, application notes and data books unless otherwise agreed with EPCOS during the design-in-phase. Ensure suitability of thermistor through reliability testing during the design-in phase. The thermistors should be evaluated taking into consideration worst-case conditions.
Sensors Limit temp. sensors, leaded disks, coated, miniaturized C8 Mounting Electrode must not be scratched before/during/after the mounting process. Contacts and housing used for assembly with thermistor have to be clean before mounting. Especially grease or oil must be removed. When PTC thermistors are encapsulated with sealing material, the precautions given in chapter "Mounting instructions", "Sealing and potting" must be observed.
Sensors Limit temp.
Sensors Limit temp.
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.
