Ferrites and accessories Toroids R 102, R 140 Series/Type: Date: B64290 September 2006 Data Sheet EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the information contained therein without EPCOS’ prior express consent is prohibited.
R 102 × 65.8 × 15.0 B64290L0084 R 140 × 103 × 25.0 B64290A0705 R 102 × 65.8 × 15.0 (mm) R 4.016 × 2.591 × 0.591 (inch) ■ Epoxy coating Dimensions da (mm) di (mm) Height (mm) da (inch) di (inch) Height (inch) 102.0 ±2.0 65.8 ±1.3 15.0 ±0.5 4.016 ±0.079 2.591 ±0.051 0.591 ±0.020 uncoated 1) 104.8 max. 63.7 min. 16.3 max. 4.126 max. 2.508 min. 0.642 max. coated Characteristics and ordering codes Mate- AL value rial µi Ordering code (approx.
Ferrites and accessories Cautions and warnings Mechanical stress and mounting Ferrite cores have to meet mechanical requirements during assembling and for a growing number of applications. Since ferrites are ceramic materials one has to be aware of the special behavior under mechanical load. As valid for any ceramic material, ferrite cores are brittle and sensitive to any shock, fast changing or tensile load.
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.
Ferrites and accessories Cautions and warnings Mechanical stress and mounting Ferrite cores have to meet mechanical requirements during assembling and for a growing number of applications. Since ferrites are ceramic materials one has to be aware of the special behavior under mechanical load. As valid for any ceramic material, ferrite cores are brittle and sensitive to any shock, fast changing or tensile load.
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.
