Datasheet

ManualsBrandsEPCOS ManualsHF & EMC ComponentsToroidal ferrite core coated Cable Ø (max.) 14.8 mm (Ø) 26.8 mm (outer) RINGKERN, BESCHICHTET, 25,3X14,8X10 T35 1

Data SheetData Sheet

Date: September 2006

 EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the

information contained therein without EPCOS’ prior express consent is prohibited.

Ferrites and accessories

Toroids

25.3, R 29.5

Series/Type: B64290

Summary of content (5 pages)

PAGE 1
Ferrites and accessories Toroids R 25.3, R 29.5 Series/Type: Date: B64290 September 2006 Data Sheet  EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the information contained therein without EPCOS’ prior express consent is prohibited.
PAGE 2
R 25.3 × 14.8 × 10.0 B64290L0618 R 25.3 × 14.8 × 15.0 B64290L0615 R 25.3 × 14.8 × 10.0 (mm) R 0.996 × 0.583 × 0.394 (inch) ■ Epoxy coating Dimensions da (mm) di (mm) Height (mm) da (inch) di (inch) Height (inch) 25.3 ±0.5 14.8 ±0.5 10.0 ±0.2 0.996 ±0.020 0.583 ±0.020 0.394 ±0.008 uncoated 1) 26.6 max. 13.5 min. 11.0 max. 1.047 max. 0.531 min. 0.433 max. coated Characteristics and ordering codes Mate- AL value rial µi Ordering code (approx.
PAGE 3
R 25.3 × 14.8 × 20.0 B64290L0616 R 29.5 × 19.0 × 14.9 B64290L0647 R 25.3 × 14.8 × 20.0 (mm) R 0.996 × 0.583 × 0.787 (inch) ■ Epoxy coating Dimensions da (mm) di (mm) Height (mm) da (inch) di (inch) Height (inch) 25.3 ±0.5 14.8 ±0.5 20.0 ±0.5 0.996 ±0.020 0.583 ±0.020 0.787 ±0.020 uncoated 1) 26.6 max. 13.5 min. 21.3 max. 1.047 max. 0.531 min. 0.839 max. coated Characteristics and ordering codes Mate- AL value rial µi Ordering code (approx.
PAGE 4
Ferrites and accessories Cautions and warnings Mechanical stress and mounting Ferrite cores have to meet mechanical requirements during assembling and for a growing number of applications. Since ferrites are ceramic materials one has to be aware of the special behavior under mechanical load. As valid for any ceramic material, ferrite cores are brittle and sensitive to any shock, fast changing or tensile load.
PAGE 5
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.