Ferrites and accessories EP 13 Core and accessories Series/Type: Date: B65843A, B65844 September 2006 Data Sheet EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the information contained therein without EPCOS’ prior express consent is prohibited.
EP 13 Core B65843A ■ To IEC 61596 ■ For transformers featuring high inductance 5,5 = 1.24 mm–1 = 24.2 mm = 19.5 mm2 = 14.9 mm2 = 472 mm3 13 _ 0,3 Σ l/A le Ae Amin Ve 4,5 _ 0,3 9,7+0,6 s ∗) Magnetic characteristics (per set) 9+0,4 2,4±0,1 9 _ 0,4 and low overall height ■ For power applications ■ Delivery mode: sets Approx. weight 4.5 g/set 12,8 _ 0,6 ∗) gapped (one-sided) FEP0017-A Gapped µe Ordering code nH s approx. mm T38 63 ±3% 100 ±3% 160 ±4% 200 ±4% 250 ±5% 315 ±6% 400 ±7% 0.39 0.
EP 13 Core B65843A Gapped µe Ordering code nH s approx. mm N45 63 ±3% 100 ±3% 160 ±4% 200 ±4% 250 ±5% 315 ±6% 400 ±7% 0.38 0.24 0.15 0.12 0.09 0.07 0.05 62 99 158 198 247 311 395 B65843A0063A045 B65843A0100A045 B65843A0160B045 B65843A0200B045 B65843A0250J045 B65843A0315C045 B65843A0400E045 N87 63 ±3% 100 ±3% 160 ±4% 200 ±4% 250 ±5% 315 ±6% 400 ±7% 0.37 0.23 0.14 0.11 0.09 0.07 0.
EP 13 Accessories B65844 Coil former, squared pins Material: GFR thermosetting plastic (UL 94 V-0, insulation class to IEC 60085: H max. operating temperature 180 °C), color code black Sumikon PM 9630 ® [E41429 (M)], SUMITOMO BAKELITE CO LTD Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3.5 s Winding: see Data Book 2007, chapter “Processing notes, 2.
EP 13 Accessories B65844 Coil former with closed center flange for high-voltage applications Material: GFR thermosetting plastic (UL 94 V-0, insulation class to IEC 60085: H max. operating temperature 180 °C), color code black Sumikon PM 9630 ® [E41429 (M)], SUMITOMO BAKELITE CO LTD Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3.5 s Winding: see Data Book 2007, chapter “Processing notes, 2.
EP 13 Accessories B65844 Mounting assembly The set comprises a yoke and a clamp Yoke Made of nickel silver (0.4 mm) with ground terminal (tinned) Clamp Spring clamp, made of nickel silver (0.4 mm) Ordering code Complete mounting assembly 7,5 Clamp 4 7,5 16,5 Yoke B65844A2000X000 13 14 2,6 1 x 0,4 11,7 FEP0020-F Please read Cautions and warnings and Important notes at the end of this document.
Ferrites and accessories Cautions and warnings Mechanical stress and mounting Ferrite cores have to meet mechanical requirements during assembling and for a growing number of applications. Since ferrites are ceramic materials one has to be aware of the special behavior under mechanical load. As valid for any ceramic material, ferrite cores are brittle and sensitive to any shock, fast changing or tensile load.
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.
