Ferrites and accessories EELP 14, EILP 14 Core set (without clamp recess) Series/Type: Date: B66281G, B66281P September 2006 Data Sheet EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the information contained therein without EPCOS’ prior express consent is prohibited.
ELP 14/3.5/5 Core (without clamp recess) B66281 ELP 14/3.5/5 through ELP 64/10/50 Core set EELP 14 Combination: ELP 14/3.5/5 with ELP 14/3.5/5 11±0,25 3±0,05 2±0,1 ■ To IEC 62317-9 ■ Delivery mode: single units Magnetic characteristics (per set) = 1.45 mm–1 = 20.7 mm = 14.3 mm2 = 13.9 mm2 = 296 mm3 5±0,1 Σ l/A le Ae Amin Ve 3,5±0,1 ELP 14/3.5/5 14±0,3 Approx. weight 1.6 g/set FEK0369-D Ungapped Material AL value nH µe PV W/set Ordering code (per piece) N49 800 ±25% 920 < 0.
ELP 14/3.5/5 with I 14/1.5/5 Core (without clamp recess) B66281 = 1.15 mm–1 = 16.7 mm = 14.5 mm2 = 13.9 mm2 = 242 mm3 5±0,1 Σ l/A le Ae Amin Ve 11±0,25 3±0,05 5±0,1 Magnetic characteristics (per set) 0,2 max. ■ To IEC 62317-9 ■ Delivery mode: single units 2±0,1 11±0,25 3±0,05 I 14/1.5/5 3,5±0,1 ELP 14/3.5/5 14±0,3 14±0,3 Approx. weight 1.3 g/set 1,5±0,1 Core set EILP 14 Combination: ELP 14/3.5/5 with I 14/1.
Ferrites and accessories Cautions and warnings Mechanical stress and mounting Ferrite cores have to meet mechanical requirements during assembling and for a growing number of applications. Since ferrites are ceramic materials one has to be aware of the special behavior under mechanical load. As valid for any ceramic material, ferrite cores are brittle and sensitive to any shock, fast changing or tensile load.
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.
