Datasheet

3 Lead configuration

Straight leads are standard for disk varistors. Other lead configurations as crimp style or cus-

tomer-specific lead wire length according to 3.1, 3.2, 3.3 and 3.4 are optional. Crimped leads

(non-standard) are differently crimped for technical reasons; the individual crimp styles are denot-

ed by consecutive numbers (S, S2 through S5) as shown in the dimensional drawings below.

The crimp styles of the individual types can be seen from the type designation in the ordering ta-

bles.

3.1 Crimp style mode

Example: B72210S0271K

Digit 13

Digit 13 of ordering code Crimp style Figure

1 Standard, straight leads 1

2 S2 2

3 S3 3

4 S4 4

5 S5 5

Available upon request

Internal coding  6

3.2 Standard leads and non-standard crimp styles

Standard, straight leads

Non-standard,

crimp style S2

Non-standard,

crimp style S3

Figure 1 Figure 2 Figure 3

Leaded varistors B722*

SuperioR-MP, S20 series

Page 17 of 22Please read Cautions and warnings and

Important notes at the end of this document.