Datasheet

Non-standard, crimp style S4 Non-standard, crimp style S5
Figure 4 Figure 5
3.3 Component height (h
max
) for crimped versions (non-standard)
Due to technical reasons the component height (h
max
) increases if a crimp is added. The maxi-
mum height of the crimped component can be found in the table below.
Nominal diameter
mm
V
RMS
V
Crimp style
mm
h
max
mm
5 11 ... 175 S2 5.0 10.0
5 210 ... 460 S3 5.0 10.0
7 11 ... 175 S2 5.0 12.0
7 210 ... 460 S3 5.0 12.0
10 11 ... 300 S5 7.5 15.5
10 320 ... 460 S3/S5 7.5 16.5
10 510 S3/S5 7.5 17.5
10 Automotive S5 7.5 17.0
10 Automotive (D1 types) S5 7.5 16.0
10 11 ... 175 S4 5.0 16.5
10 210 ... 460 S3 5.0 16.5
14 11 ... 300 S5 7.5 20.0
14 320 ... 460 S3/S5 7.5 20.0
14 510 S3/S5 7.5 21.5
14 Automotive S5 7.5 21.0
14 Automotive (D1 types) S5 7.5 20.0
20 11 ... 320 S5 10.0 27.0
20 385 ... 510 S5 10.0 27.5
Leaded varistors B722*
StandarD series
Page 41 of 46Please read Cautions and warnings and
Important notes at the end of this document.