Datasheet
143 04/02
Construction
■ Cylindrical varistor element, encapsulated
■ Encapsulation: thermoplast, flame-retardant to UL 94 V-0
■ Termination: tinned copper alloy
Features
■ Electrical equivalents to leaded
types SIOV-S05/S07 up to 460 V
RMS
■ Good solderability
■ PSpice models
■ Approvals: UL (all types) and CSA (³ K130)
Taping
■ Supply on 8/12-mm tape, for tape dimensions see pages 154/155,
for reel dimensions and packing units see page 157, chapter “SMD Varistors: Taping”
Type designation
Detailed description of coding system on page 39, chapter “General Technical Information”
Note: Contact EPCOS for consultancy if solvents on water-base are used for cleaning.
General technical data
Climatic category
LCT
UCT
Damp heat, steady state
(93 % r.h., 40
°C)
40/85/56
– 40
°C
+ 85
°C
56 days
in accordance with IEC 60068-1
in accordance with IEC 60068-2-3
Operating temperature – 40 … + 85
°C in accordance with CECC 42 000
Storage temperature – 40 … + 125
°C
Electric strength
³ 2,5 kV
RMS
in accordance with CECC 42 000
Insulation resistance
³ 1,0 GW in accordance with CECC 42 000
Response time < 10 ns
Solderability 235
°C, 2 s in accordance with IEC 60068-2-58
Resistance to soldering heat 260
°C, 10 s in accordance with IEC 60068-2-20
EPCOS metal oxide varistor
SIOV-CU 4032 K 275 G2
Design
Size (nominal)
Taping mode
Max. AC operating voltage
Tolerance of varistor voltage
SMD Varistors
Monolithic; Standard Series