Datasheet

Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/µs.
"k
0
" represents the maximum permissible pulse characteristic of the waveform applied to the
capacitor, expressed in V
2
/µs.
Note:
The values of dV/dt and k
0
provided below must not be exceeded in order to avoid damaging the
capacitor.
dV/dt and k
0
values
Lead spacing 15 mm 22.5 mm
dV/dt in V/µs 3 000 1 000
k
0
in V
2
/µs 2 100 000 700 000
Impedance Z versus frequency f
(typical values)
B81123
Y1 / 500 V AC
Page 6 of 19Please read Cautions and warnings and
Important notes at the end of this document.