SMT inductors SIMID series, SIMID 2220-A Series/Type: B82442A Date: October 2012 a~í~=pÜÉÉí ¤ EPCOS AG 2012. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SMT inductors, SIMID series B82442A SIMID 2220-A Size 2220 (EIA) or 5650 (IEC) Rated inductance 1 ... 10000 μH Rated current 25 ... 1800 mA Construction ■ Upright ferrite drum core ■ Laser-welded winding ■ Flame-retardant molding Features ■ ■ ■ ■ ■ Temperature range up to +150 °C Current handling capability up to 1.
SMT inductors, SIMID series B82442A SIMID 2220-A Dimensional drawing and layout recommendation 3.5±0.11) A 0.7±0.2 1) B C D B 0.7 min.1) 5+0.3 0.15 max. IND0053-6 5.6+0.3 A B C D 4.5 2.0 4.0 8.0 5+0.3 Marking 1) Soldering area Dimensions in mm IND0088-3-E Taping and packing Reel 12±0.3 2±0.05 _0 12.4 +1.5 <_ 6.0 1.6±0.1 8±0.1 62±1.
SMT inductors, SIMID series B82442A SIMID 2220-A Technical data and measuring conditions Rated inductance LR Measured with impedance analyzer Agilent 4294A at frequency fL, 0.
SMT inductors, SIMID series B82442A SIMID 2220-A Characteristics and ordering codes Tolerance Qmin Ordering code1)2) fL ; fQ IR Rmax fres,min MHz mA : MHz 10 7.96 1800 0.024 95 B82442A1102K000 1.2 10 7.96 1700 0.028 70 B82442A1122K000 1.5 10 7.96 1600 0.032 55 B82442A1152K000 1.8 10 7.96 1400 0.040 47 B82442A1182K000 2.2 10 7.96 1300 0.048 42 B82442A1222K000 2.7 10 7.96 1200 0.056 37 B82442A1272K000 3.3 10 7.96 1120 0.064 34 B82442A1332K000 3.
SMT inductors, SIMID series B82442A SIMID 2220-A Characteristics and ordering codes Tolerance Qmin Ordering code1)2) fL ; fQ IR Rmax fres,min MHz mA : MHz 20 0.796 170 2.72 3.9 B82442A1224+000 20 0.796 155 3.36 3.6 B82442A1274+000 330 20 0.796 140 3.92 3.2 B82442A1334+000 390 20 0.796 130 4.64 2.9 B82442A1394+000 470 20 0.796 120 5.60 2.6 B82442A1474+000 560 20 0.796 110 6.80 2.4 B82442A1564+000 680 20 0.796 100 8.00 2.2 B82442A1684+000 820 20 0.
SMT inductors, SIMID series B82442A SIMID 2220-A Impedance |Z| versus frequency f Inductance L versus DC load current IDC measured with LCR meter Agilent 4285A, typical values at +20 °C measured with impedance analyzer Agilent 4294A/E4991A, typical values at +20 °C IND0089-B 10 6 Ω B82442A | Z | 10 5 L 10 4 10 4 10 3 10 3 10 2 10 2 10 1 1 μH 10 μH 100 μH 1000 μH 10000 μH 10 1 10 0 5 10 10 6 10 7 10 IND0090-9 10 5 μH B82442A 10000 μH 1000 μH 100 μH 10 μH 1 μH 10 0 8 Hz 10 f 1
Cautions and warnings ■ Please note the recommendations in our Inductors data book (latest edition) and in the data sheets. – Particular attention should be paid to the derating curves given there. – The soldering conditions should also be observed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing.
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.
