SMT power inductors Size 6.0 u 6.0 u 3.0 (mm) Series/Type: B82462A4 Date: June 2012 Data Sheet ¤ EPCOS AG 2012. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SMT power inductors B82462A4 Size 6.0 x 6.0 x 3.0 (mm) Rated inductance 1 ... 1000 μH Rated current 0.11 ...
SMT power inductors B82462A4 Size 6.0 x 6.0 x 3.0 (mm) 1.5 1.5 7 3 max. 0.45±0.1 1) 0.15±0.03 2.4 2±0.1 1) Dimensional drawing and layout recommendation IND0469-B 1) 0.9±0.1 0.1 6 max. Marking 6±0.2 Dimensions in mm 1) Soldering area IND0471-F-E Taping and packing Reel _ 0.1 12 +0.3 2±0.05 _0 12.4 +1.5 1.6±0.1 3.45 max. Direction of unreeling IND0330-5-E Dimensions in mm 3 62±1.5 IND0350-S 8±0.
SMT power inductors B82462A4 Size 6.0 x 6.0 x 3.0 (mm) Technical data and measuring conditions Rated inductance LR Measured with impedance analyzer Agilent 4294A at frequency fL, 0.1 V, +20 °C Rated temperature TR +85 °C Rated current IR Max. permissible DC with temperature increase of d 40 K at rated temperature Saturation current Isat Max. permissible DC with inductance decrease 'L/L0 of approx. 10% DC resistance Rmax Measured at +20 °C Solderability (lead-free) Dip and look method Sn95.5Ag3.
SMT power inductors B82462A4 Size 6.0 x 6.0 x 3.0 (mm) Characteristics and ordering codes Tolerance fL Ordering code1) IR Isat Rmax A A : M 0.1 3.00 5.8 0.024 B82462A4102M000 1.5 0.1 2.60 4.6 0.030 B82462A4152M000 2.2 0.1 2.30 3.8 0.042 B82462A4222M000 3.3 0.1 2.00 3.2 0.060 B82462A4332M000 4.7 0.1 1.65 2.8 0.080 B82462A4472M000 6.8 0.1 1.40 2.3 0.10 B82462A4682M000 0.1 1.15 1.8 0.14 B82462A4103M000 K 0.1 0.90 1.5 0.21 B82462A4153K000 22 0.1 0.80 1.
SMT power inductors B82462A4 Size 6.0 x 6.0 x 3.
Cautions and warnings ■ Please note the recommendations in our Inductors data book (latest edition) and in the data sheets. – Particular attention should be paid to the derating curves given there. – The soldering conditions should also be observed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing.
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.
