Datasheet

3 06/11
Please read Cautions and warnings and
Important notes at the end of this document.
Dimensional drawings and pin configurations
Horizontal version (B82791G15) Vertical version (B82791H15)
Technical data and measuring conditions
Rated voltage V
R
42 V AC (50/60 Hz) / 80 V DC
Rated temperature T
R
+60 °C
Rated current I
R
Referred to 50 Hz and rated temperature
Rated inductance L
R
Measured with Agilent 4284A at 10 kHz, 0.1 mA, +20 °C
Inductance is specified per winding.
Inductance tolerance 30% at +20 °C
B82791H0015A016: –25/+35% at +20 °C
Inductance decrease L/L
0
< 10% at DC magnetic bias with I
R
, +20 °C
Stray inductance L
stray,typ
Measured with Agilent 4275A at 10 kHz, 5 mA, +20 °C,
typical values
DC resistance R
typ
Measured at +20 C, typ. values, specified per winding
Solderability (lead-free) Sn96.5Ag3.0Cu0.5: (+245 5) °C, (3 0.3) s
Wetting of soldering area 95%
(to IEC 60068-2-20, test Ta)
Resistance to soldering heat
(wave soldering)
(+260 5) °C, (10 1) s
(to IEC 60068-2-20, test Tb)
Climatic category 40/125/56 (to IEC 60068-1)
Storage conditions (packaged) –25 °C … +40 °C, 75% RH
Weight Approx. 3 g
IND0215-W-E
8 max.
2.8+0.5
ø0.6
10±0.1
17.5 max.
15±0.1
17.5 max.
41
32
41
23
Marking
IND0214-8-E
17.6 max.
2.8+0.4
ø0.6
12.7±0.1
11±0.1
Marking
0.10.8
_
7.4 max.
5.08±0.1
8±0.05
15.2 max.
2.54±0.1
2
1
34
34
21
Tolerances to ISO 2768-M unless otherwise noted.
Dimensions in mm.
B82791G15/H15Data and signal line chokes
Common-mode chokes, ring core