Data and signal line chokes Common-mode chokes, ring core, EIA 1812 0.011 … 0.47 mH, 200 … 300 mA, 60 °C Series/Type: B82799C0/S0 %BUB 4IFFU October 2008 Date: © EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
Data and signal line chokes B82799C0/S0 Common-mode chokes, ring core, EIA 1812 Rated voltage 42 V AC/80 V DC Rated inductance 0.011 mH to 0.
Data and signal line chokes B82799C0/S0 Common-mode chokes, ring core, EIA 1812 2 4 3 4 3 3.2 max. 4.5±0.2 4.0 2 2.2 0.45 max. 0.75±0.15 1) 1 0.6 1 Layout recommendation 5.9 1 min. 1) 1±0.1 1.1±0.11) Dimensional drawing and pin configuration IND0302-8 0.04 3.2+0.2 0.8±0.1 Marking 0.8±0.1 1) Soldering area Dimensions in mm IND0301-6-E Taping and packing Blister tape Reel 4±0.1 Direction of unreeling _0 12.
Data and signal line chokes B82799C0/S0 Common-mode chokes, ring core, EIA 1812 Technical data and measuring conditions Rated voltage VR 42 V AC (50/60 Hz) / 80 V DC Rated temperature TR 60 °C Rated current IR Referred to 50 Hz and rated temperature Applicable current IR for high temperature applications 0.5 × IR, referred to 50 Hz and 150 °C ambient temperature Rated inductance LR Measured with Agilent 4284A at 100 kHz, 0.1 mA, 20 °C Inductance is specified per winding.
Data and signal line chokes B82799C0/S0 Common-mode chokes, ring core, EIA 1812 Insertion loss α (typical values at |Z| = 50 Ω, 20 °C) asymmetrical, all branches in parallel (common mode) symmetrical (differential mode) LR = 0.022 mH (low Lstray) LR = 0.011 mH IND0002-K 50 dB IND0892-V 50 B82799C0113N001 dB B82799C0223N001 α α 40 40 30 30 20 20 10 10 0 4 10 10 5 10 6 10 7 0 4 10 10 8 Hz 10 9 f LR = 0.022 mH (high Lstray) dB 10 6 10 7 10 8 Hz 10 9 f LR = 0.
Data and signal line chokes B82799C0/S0 Common-mode chokes, ring core, EIA 1812 Insertion loss α (typical values at |Z| = 50 Ω, 20 °C) asymmetrical, all branches in parallel (common mode) symmetrical (differential mode) LR = 0.051 mH (low Lstray) LR = 0.033 mH (high Lstray) IND0004-2 50 dB IND0894-Q 50 B82799S0333N001 dB α B82799C0513N001 α 40 40 30 30 20 20 10 10 0 4 10 10 5 10 6 10 7 0 4 10 10 8 Hz 10 9 f LR = 0.051 mH (high Lstray) dB 10 6 10 7 10 8 Hz 10 9 f LR = 0.
Data and signal line chokes B82799C0/S0 Common-mode chokes, ring core, EIA 1812 Insertion loss α (typical values at |Z| = 50 Ω, 20 °C) asymmetrical, all branches in parallel (common mode) symmetrical (differential mode) LR = 0.33 mH LR = 0.22 mH IND0007-U 50 dB IND0037-H 50 B82799C0224N001 dB α B82799C0334N001 α 40 40 30 30 20 20 10 10 0 4 10 10 5 10 6 10 7 0 4 10 10 8 Hz 10 9 f 10 6 10 7 10 8 Hz 10 9 f Current derating Iop/IR versus ambient temperature LR = 0.
Data and signal line chokes B82799C0/S0 Common-mode chokes, ring core, EIA 1812 Recommended reflow soldering curve Pb containing solder material (based on CECC 00802 edition 2) 300 10 s ˚C 260 ˚C approx. 245 ˚C Temperature 250 10 s 215 ˚C 200 180 ˚C 150 approx.
Cautions and warnings ■ Please note the recommendations in our Inductors data book (latest edition) and in the data sheets. – Particular attention should be paid to the derating curves given there. – The soldering conditions should also be observed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing.
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.
