EMC filters 4-line filters for installations and systems Rated current 6 to 125 A Series/Type: B84131 Date: January 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the information contained therein without EPCOS’ prior express consent is prohibited.
4-line filters B84131 for installations and systems Power line filters for 3-phase systems Rated voltage 440/250 V AC, 50/60 Hz Rated current 6 to 125 A Construction ■ 4-line filter ■ Metal case Features ■ ■ ■ ■ High insertion loss Compact, cost-optimized design Easy to install ENEC10, UL and CSA approval Applications ■ Power supplies for – data systems, telecom systems – medical equipment, industrial installations – copiers Terminals ■ Tab connectors 6.3 × 0.
4-line filters B84131 for installations and systems Technical data and measuring conditions Rated voltage VR 440/250 V AC, 50/60 Hz Rated current IR Referred to 40 °C ambient temperature Test voltage Vtest 1770 V DC, 2 s (line/line) 2700 V DC, 2 s (lines/case) Leakage current lleak At 400 V AC, 50 Hz Climatic category (IEC 60068-1) 25/085/21 (–25 °C/+85 °C/21 days damp heat test) Approvals EN 133200, UL 1283, CSA C22.2 No.
-line filters B84131 for installations and systems Dimensional drawings B84131A0006A001 (6 A) 162±1 L1’ L1 N 13±0.5 N’ L2 L3 46±0.5 L3’ L2’ 20±0.5 30±0.2 135±0.8 Tab connector A6.3 x 0.8 87±1 LOAD 62±0.5 LINE 75±0.2 M5 (4x) 44±0.2 SSB0958-X-E B84131M0003A116 (16 A) Tab connector A6.3 x 0.8 174.5 104 24.6 24.6 24.6 15.1 52.5 36 50 13.5 149 52 44±0.2 M5 x 6 1) 14.5 75±0.
4-line filters B84131 for installations and systems B84131M0001G125, B84131M0001G135/H135 (25 A, 35 A) M6 and/or 10-32 UNF 104 24.6 24.6 24.6 15.1 14±0.3 149 80 33.5 23 15 52.5±0.8 52 44±0.2 M5 x 6 14.5 1) 75±0.3 1) Also suitable for screws with 10-32 UNF thread Type SSB0321-L-E IR Screw thread Tightening torque B84131M0001 A G125 25 M6 3 G135 35 M6 3 H135 35 10-32 UNF 2 Nm B84131M0002G150, B84131M0002G163 (50 A, 63 A) Screw thread M6 141 131 28.6 24.6 24.6 24.
4-line filters B84131 for installations and systems B84131M0004G180, B84131M0004G225 (80 A, 125 A) Screw thread M10 Tightening torque 10 Nm 220±1.2 160±0.3 25±0.5 120±0.3 M5 x 6 1) 1) Also suitable for screws with 10-32 UNF thread Please read Cautions and warnings and Important notes at the end of this document. 30±0.5 150±1.2 M10 35±0.8 150±1.2 35±0.8 35±0.8 35±0.
4-line filters B84131 for installations and systems Insertion loss (typical values at Z = 50 Ω) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) differential mode (symmetrical) Filters for 6 A Filters for 16 A SSB1063-I 100 dB B84131A0006A001 α SSB0342-9 100 dB B84131M0003A116 α 80 80 60 60 40 40 20 20 0 10 4 10 5 10 6 10 7 0 10 4 Hz 10 8 f Filters for 25 A SSB1676-H α α 10 7 Hz 10 8 f 80 60 60 40 40 20 20 10 6 10 7 0 10 4 H
4-line filters B84131 for installations and systems Insertion loss (typical values at Z = 50 Ω) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) differential mode (symmetrical) Filters for 50 A Filters for 63 A 100 dB B84131M0002G150 SSB0541-D SSB0345-Y 100 dB B84131M0002G163 α α 80 80 60 60 40 40 20 20 0 10 4 10 5 10 6 10 7 0 10 4 Hz 10 8 f Filters for 80 A 10 5 10 6 10 7 Hz 10 8 f Filters for 125 A SSB0545-B 100 dB B84131M0004G180
EMC filters Cautions and warnings Important information Please read all safety and warning notes carefully before installing the EMC filter and putting it into operation (see ). The same applies to the warning signs on the filter. Please ensure that the signs are not removed nor their legibility impaired by external influences.
EMC filters Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.