EMC filters 2-line filters for converters and power electronics Rated current 8 to 25 A Series/Type: B84142B*R000 Date: January 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the information contained therein without EPCOS’ prior express consent is prohibited.
-line filters B84142B*R000 for converters and power electronics Power line filters for 1-phase systems Rated voltage 250 V DC/AC, 50/60 Hz Rated current 8 to 25 A Construction ■ 2-line filters ■ Metal case Features ■ Very high insertion loss due to two-stage construction Optimized leakage current Easy to install Degree of protection IP 201) Optimized for long motor cables and operation under full load ■ Design complies with UL 1283, CSA C22.2 No.
2-line filters B84142B*R000 for converters and power electronics Typical circuit diagram LINE LOAD L L’ N N’ SSB0772-K Technical data and measuring conditions Rated voltage VR 250 V DC/AC, 50/60 Hz Rated current IR Referred to 40 °C ambient temperature Test voltage Vtest 1770 V DC, 2 s (line/line) 2700 V DC, 2 s (lines/case) Overload capability (thermal) 1.5 · IR for 3 min per hour or 2.
2-line filters B84142B*R000 for converters and power electronics Dimensional drawings 0.8±0.2 61 max. 32 max. 20.5±0.5 B84142B0008R000 … B84142B0016R000 (8 … 16 A) 31 max. 86 max. 144 max. 113 max. Marking L N PE LINE L’ N’ PE 100±0.3 70±0.3 LOAD Terminal blocks 4 mm 2 Tightening torque 0.6 ... 0.8 Nm 5.8±0.2 121 max. SSB0774-2-E 0.8 PE M6 x 25 15±1 31 max. 86 max. 70±0.3 113 max. LINE PE N’ L1’ PE N L1 Marking 100±0.3 206 max. LOAD Terminal blocks 10 mm 2 Tightening torque 1.
2-line filters B84142B*R000 for converters and power electronics Insertion loss (typical values at Z = 50 Ω) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) differential mode (symmetrical) Filters for 8 A Filters for 12 A SSB0777-R 100 dB SSB0778-Z 100 dB α α 80 80 60 60 40 40 20 20 B84142B0012R000 B84142B0008R000 0 4 10 10 5 10 6 10 7 Hz 10 f Filters for 16 A 10 5 10 6 10 7 Hz 10 8 f Filters for 25 A SSB0775-A 100 dB α 0 4 10
EMC filters Cautions and warnings Important information Please read all safety and warning notes carefully before installing the EMC filter and putting it into operation (see ). The same applies to the warning signs on the filter. Please ensure that the signs are not removed nor their legibility impaired by external influences.
EMC filters Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.