EMC filters 3-line filters for converters and power electronics Rated current 8 to 180 A Series/Type: B84143A*R000 Date: January 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the information contained therein without EPCOS’ prior express consent is prohibited.
3-line filters B84143A*R000 for converters and power electronics Power line filters for 3-phase systems Rated voltage 480/275 V AC, 50/60 Hz Rated current 8 to 180 A Alternative version ■ Series B84143A*R105 offers a low-cost solution Construction ■ 3-line filter ■ Metal case Features ■ ■ ■ ■ ■ High insertion loss Optimized leakage current Easy to install Degree of protection: IP 201) Optimized for long motor cables and operation under full load ■ Design complies with EN 133200, UL 1283, CSA C22.2 No.
-line filters B84143A*R000 for converters and power electronics Typical circuit diagram LOAD L1’ LINE L1 L2 L2’ L3 L3’ SSB0797-6 Technical data and measuring conditions Rated voltage VR 480/275 V AC, 50/60 Hz Rated current IR Referred to 40 °C ambient temperature Test voltage Vtest 1770 V DC, 2 s (line/line) 2700 V DC, 2 s (lines/case) Overload capability (thermal) 1.5 · IR for 3 min per hour or 2.
3-line filters B84143A*R000 for converters and power electronics Characteristics and ordering codes VR AC V Ileak Terminal cross section mA mm2 IR A Approx. weight kg Rtyp mΩ Ordering code (440/250 V) 8 4 < 3.5 40 2.2 B84143A0008R000 × 12 4 < 3.5 20 2.2 B84143A0012R000 × 16 4 < 3.5 15 2.2 B84143A0016R000 × 25 10 < 3.5 8 3.7 B84143A0025R000 × 36 10 < 3.5 3.8 3.7 B84143A0036R000 × 50 10 <6 2.0 4.0 B84143A0050R000 × 80 25 <6 1.0 9.
3-line filters B84143A*R000 for converters and power electronics 1±0.1 30±1 91 max. 46±1 31±0.5 B84143A0025R000 … A0050R000 (25 … 50 A) PE M6 x 24 22.5±1 126 max. 216 max. LINE LOAD 6.6±0.2 140±0.3 Marking 156 max. PE L3’ L2’ L1’ PE L3 L2 L1 80±0.2 Terminal blocks 10 mm 2 Tightening torque 1.5 ... 1.8 Nm 166 max. SSB0977-4-E PE M10 x 34 62±0.8 1.0±0.1 141 max. 90±1 48.5±0.5 B84143A0080R000 (80 A) 18±0.5 141 max. 300 max. Marking LINE LOAD 6.6±0.2 221 max.
3-line filters B84143A*R000 for converters and power electronics 65±0.8 1.0±0.1 141 max. 97±1 54±0.5 B84143A0120R000, B84143A0150R000 (120 and 150 A) PE M10 x 34 348 max. 18±0.5 141 max. Marking LINE LOAD 6.6±0.2 L1’ L2’ L3’ PE 171 max. L1 L2 L3 PE 155±0.3 115±0.2 Terminal blocks 50 mm 2 Tightening torque 6 ... 8 Nm 261 max. SSB0979-K-E PE M10 x 34 62±0.8 1.0±0.1 141 max. 74±0.5 105±1 B84143A0180R000 (180 A) 16±0.5 141 max. 404 max. Marking LINE LOAD 6.6±0.2 165±0.
3-line filters B84143A*R000 for converters and power electronics Insertion loss (typical values at Z = 50 Ω) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) differential mode (symmetrical) Filters for 8 A Filters for 12 A SSB0798-E 100 dB B84143A0008R000 α SSB0799-M 100 dB B84143A0012R000 α 80 80 60 60 40 40 20 20 0 4 10 10 5 10 6 10 7 0 4 10 Hz 10 8 f Filters for 16 A 10 5 10 6 10 7 Hz 10 8 f Filters for 25 A SSB0800-U 100 dB B8414
3-line filters B84143A*R000 for converters and power electronics Insertion loss (typical values at Z = 50 Ω) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) differential mode (symmetrical) Filters for 36 A Filters for 50 A SSB0802-B 100 dB B84143A0036R000 SSB0985-U 100 dB B84143A0050R000 α α 80 80 60 60 40 40 20 20 0 4 10 10 5 10 6 10 7 0 10 4 Hz 10 8 f Filters for 80 A 10 5 10 6 10 7 Hz 10 8 f Filters for 120 … 180 A SSB0986-3 10
EMC filters Cautions and warnings Important information Please read all safety and warning notes carefully before installing the EMC filter and putting it into operation (see ). The same applies to the warning signs on the filter. Please ensure that the signs are not removed nor their legibility impaired by external influences.
EMC filters Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.
