Datasheet

1.2 Blister tape (taping to IEC 60286-3)
Dimensions in mm
Case size (inch)
(mm)
0506
1216
0612
1632
1012
2532
Tolerance
Compartment width A
0
1.5 1.9 2.8 ±0.2
Compartment length B
0
1.8 3.5 3.5 ±0.2
Compartment height K
0
0.8 1.8 1.8 max.
Sprocket hole diameter D
0
1.5 1.5 1.5 +0.1/ 0
Compartment hole diameter D
1
1.0 1.0 1.0 min.
Sprocket hole pitch P
0
4.0 4.0 4.0 ±0.1
1)
Distance center hole to center
compartment
P
2
2.0 2.0 2.0 ±0.05
Pitch of component compartments P
1
4.0 4.0 4.0 ±0.1
Tape width W 8.0 8.0 8.0 ±0.3
Distance edge to center of hole E 1.75 1.75 1.75 ±0.1
Distance center hole to center
compartment
F 3.5 3.5 3.5 ±0.05
Distance compartment to edge G 0.75 0.75 0.75 min.
Thickness tape T 0.3 0.3 0.3 max.
Overall thickness T
2
1.3 2.5 2.5 max.
1)
≤ ±0.2 mm over 10 sprocket holes
CeraDiodes
Standard series
Page 10 of 19Please read Cautions and warnings and
Important notes at the end of this document.