Datasheet

1 Taping and packing for chip and array CeraDiodes
1.1 Cardboard tape (taping to IEC 60286-3)
Dimensions in mm
Case size (inch) 0201
0402 0603 1003 0508 Tolerance
(mm)
0603 1005 1608 2508 1220
Compartment width A
0
0.38 ±0.05 0.6 0.95 1.0 1.6 ±0.2
Compartment length B
0
0.68 ±0.05 1.15 1.8 2.85 2.4 ±0.2
Sprocket hole diameter D
0
1.5 ±0.1 1.5 1.5 1.5 1.5 +0.1/ 0
Sprocket hole pitch P
0
4.0 ±0.1
1)
4.0 4.0 4.0 4.0 ±0.1
1)
Distance center hole to center
compartment
P
2
2.0 ±0.05 2.0 2.0 2.0 2.0 ±0.05
Pitch of component compartments P
1
2.0 ±0.05 2.0 4.0 4.0 4.0 ±0.1
Tape width W 8.0 ±0.3 8.0 8.0 8.0 8.0 ±0.3
Distance edge to center of hole E 1.75 ±0.1 1.75 1.75 1.75 1.75 ±0.1
Distance center hole to center
compartment
F 3.5 ±0.05 3.5 3.5 3.5 3.5 ±0.05
Distance compartment to edge G 1.35 min. 0.75 0.75 0.75 0.75 min.
Thickness tape T 0.35 ±0.02 0.6 0.9 1.0 0.95 max.
Overall thickness T
2
0.4 min. 0.7 1.1 1.1 1.12 max.
1)
≤ ±0.2 mm over 10 sprocket holes
CeraDiodes
Standard series
Page 9 of 19Please read Cautions and warnings and
Important notes at the end of this document.