User manual

Stand: Februar 2011 Z 385 engl
4.1. Option change of rotating direction -Type: 393
General information / Operation
The additional circuit board 393 provides the facility to change the rotating direction of a
permanent magnet motor with a transistor chopper controller type GS 24 S/xx-360
under low voltage of 12 to 48V DV and a nominal current of max. 6A (10A*)
Rotation in the left or right direction can be pre-selected during standstill via a 12 V to
48 V DC control signal.
The 393 circuit board can be utilised in combination with other controllers as well
(consult with supplier if necessary).
Dimensions: Circuit board 100 x 88 (72) mm
Connection: 7-pole screw terminal block
see connection drawing
Optional: Module carrier for 35 mm standard rail or mounting plate attachment
can be supplied.
*available as a special version, the 393-1 can operate with up to 10 A nominal current
(additional relays K1 and K2 required).
Terminal block layout x1: Type 393
Terminal 1: Only used with special version 10A type 393-1
Terminal 2: GND
Terminal 3: +12 to 48V DC switching voltage change of
rotation direction
Terminal 4: lead wire motor outlet
GS 24 S/xx (armature +)
Terminal 5: lead wire motor outlet
GS 24 S/xx (armature -)
Terminal 6: motor connection (armature)
Terminal 7: motor connection (armature)