User manual

Stand: Februar 2011 Z 385 engl
In Germany the VDE regulations and the regulations of the Health and Safety Executive
apply. In addition, the regulations set forth by the EMC and Low Voltage Directive need to
be complied with as well.
Machines and equipment are also required to include device independent monitoring and
safety provisions. The user must ensure that in the event of a device malfunction, foreign
operation, outage of the control and regulation units, etc., the drive is brought to a safe
operating condition. The specialized users must read and understand the operating
manual before installation or start-up of the device. Please consult us in case of any
doubts. Any adjustments will be performed exclusively by specialised electrical personnel
under full consideration of the relevant safety regulations. Installation work is only
permitted on a tension-free device. Before restarting the device the necessary security
mechanisms and enclosure covers must be mounted as required.
The devices are archived at the OEM and the test data can be obtained from the
respective serial numbers.
Because the products undergo a continuous improvement process we would like to ask for
your understanding if we reserve the right to make any changes to the information
presented in this manual.
3.1. Delivery
Inspect the device immediately after its reception and unpacking for any transport
damage. If any damage is detected, contact the shipping company immediately and
arrange for a diligent stock assessment. This is also applies if the packaging is
intact.