User manual

Stand: Juni 2009 Z 319 engl.
16
• Only shielded lines may be used (industry lines with shield
mesh wire).
• Ensure that the protection line connection (PE) is
connected correctly. The mains filter must be connected to
the earth potential.
• Using the accessories: Input reactor
type EPH : EDMB.20.0 001 the EN 55011/1998+A1+A2
standard (limit class A) is complied with.
7.4. Low voltage directive 2006/95/EG
“Within a voltage range of 50 and 1000V AC voltage or of 75 and 1500V DC
voltage no danger to humans, farm animals or property may be caused by electric
equipment.”
EPH Elektronik supplies installation housing with increased protection type in IP 20
for the protection against direct contact in accordance with the low voltage
directive 20006/95/EG, which is also suitable for installation platform fitting.
Please refer to the supplier for further recommendations and queries.
7.5. Motors with capacity fault clearance
For motors from the automotive range with respective capacity fault clearance
modules these may have to be removed, as pulse width-modulated control causes
pulse-shaped currents which destroy the devices.