User manual

Seite 5 von 10
Stand: August 2018 Z031-MG
10. Motor direction can be changed witch a voltage (5 – 36V DC) on terminal
19 (e.g. bridge from clamp 17 to 19)
3. Technical features
• Power supply Ue: 10V DC – 36V DC (with inverse-polarity protection)
• High frequency f>20 kHz, this results in low-noise operation
• Electric connection via spring clamp terminals
• High level of effectiveness by using Power Mosfets
• Mounting: mounted with screws or on a 35mm mounting rail
The dispose of this product has to be done via separate electrical- and electronic
equipment disposal.
4. Technical data
type
Supply
Voltage
Armature voltage
U
A
Armature
current I
N
Mechanical power
P
ab
DLR 24/ 20 10-36V DC 0 - 12/24V DC 0 – 20A approx. 350W
Model: DLR 24/20/P: screw mounting
DLR 24/20/M: screw mounting or mounting rail 35mm
DLR 24/20/G: screw mounting or mounting rail 35mm
with yellow cover
Protection: external fuse: 20 AT
Environment temperature: 5° to 45°C
Relative air humidity: 18% to 85% (non-condensation)
Control range: up to 1 : 30
Speed control through EMF control with I x R compensation.