User manual

Seite 6 von 10
Stand: August 2018 Z031-MG
5. Connecting
5.1. Control connections
Speed ref. value: terminal 11: 5V DC
terminal 12: wiper external potentiometer (10kOhm)
terminal 13: GND
Controller enable 1: terminal 15: Input 5-36V DC
Controller enable 2: terminal 16: Input 5-36V DC
Speed ref.enable: terminal 18: Input 5-36V DC
Motor direction: terminal 19: Input 5-36V DC
Output 1 (ready for operation): terminal 9: turns on voltage 10V-36V DC
(<50mA), when the controller is ready
Output 2 (Overload): terminal 10: turns on voltage 10V-36V DC
(<50mA), when the current is longer
than 3 sec. at the current limit.
Resettable by selecting 0V at speed
reference value (terminal 12) or
disable speed reference (terminal 18)