Model No. EPTL14211.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care. IMPORTANT: Please register this product (see the limited warranty on the back cover of this manual) before contacting Customer Care. CALL TOLL-FREE: 1-866-997-6999 Mon.–Fri. 6 a.m.–6 p.m. MT Sat. 8 a.m.–4 p.m. MT ON THE WEB: www.iconservice.
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PART IDENTIFICATION CHART. . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precations and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing health problems.
19. The heart rate monitor is not a medical device. Various factors, including the user’s movement, may affect the accuracy of heart rate readings. The heart rate monitor is intended only as an exercise aid in determining heart rate trends in general. 23. Never insert any object into any opening on the treadmill. 24. Inspect and properly tighten all parts of the treadmill regularly. DANGER: 25.
BEFORE YOU BEGIN Thank you for selecting the revolutionary EPIC® TL 2710 treadmill. The TL 2710 treadmill offers an impressive selection of features designed to make your workouts at home more enjoyable and effective. And when you’re not exercising, the unique treadmill can be folded up, requiring less than half the floor space of other treadmills. reading this manual, please see the front cover of this manual.
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached. Extra hardware may be included.
ASSEMBLY • To hire a service technician to assemble this product in your home, call 1-800-445-2480. • To identify small parts, see page 6. • Assembly requires the following tools: • Assembly requires two persons. the included hex keys • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps.
2. Identify the Right Upright (92), which is marked with a “Right” sticker. 2 ave a second person hold the Right Upright H (92) near the Right Base Cover (102). See the inset drawing. Tie the wire tie in the lower end of the Right Upright securely around the end of the Upright Wire (93). Then, pull the other end of the wire tie in the top of the Right Upright until the Upright Wire is routed through the Right Upright.
4. Have a second person hold the console assembly near the Uprights (91, 92). 4 Console Assembly Connect the Upright Wire (93) to the Console Wire (88). See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire. Insert the connectors down into the Right Upright (92).
6. Partially tighten three 3/8" x 1 1/4" Screws (2) with three 3/8" Star Washers (6) into the Right Upright (92); do not fully tighten the Screws yet. 6 91 Repeat this step with the Left Upright (91). 2 Firmly tighten all six 3/8" x 1 1/4" Screws (2). 6 92 6 2 7. Slide the Right Upright Sleeve (90) up against the console assembly. Attach the Right Upright Sleeve with two #8 x 3/4" Tek Screws (24).
8. Raise the Frame (67) to the position shown. Have a second person hold the Frame until this step is completed. 8 Orient the Storage Latch (87) so that the large barrel and the latch knob are in the positions shown. Attach the Storage Latch (87) to the bracket on the Base (103) with a 3/8” x 2” Bolt (4) and a 3/8” Jam Nut (7). 67 Attach the upper end of the Storage Latch (87) to the bracket on the Frame (67) with a 3/8" x 1 3/4" Bolt (3) and a 3/8" Jam Nut (7).
OPERATION AND ADJUSTMENT HOW TO PLUG IN THE POWER CORD This product is for use on a nominal 120-volt circuit (see drawing 1). A temporary adapter may be used to connect the surge suppressor to a 2-pole receptacle if a properly-grounded outlet is not available (see drawing 2). DANGER: Improper connection of the equipment-grounding conductor increases the risk of electric shock. Check with a qualified electrician or serviceman if you are unsure whether the product is properly grounded.
CONSOLE DIAGRAM FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to make your workouts more effective and enjoyable. The console features revolutionary iFit Live technology that enables the treadmill to communicate with your wireless network. With iFit Live technology, you can download personalized workouts, create your own workouts, track your workout results, and access many other features. See www.iFit.com for complete information.
HOW TO TURN ON THE POWER HOW TO USE THE TOUCH SCREEN IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room temperature before you turn on the power. If you do not do this, you may damage the console display or other electrical components. The console features a tablet with a full-color touch screen. The following information will help you become familiar with the device’s advanced technology: lug in the power cord (see P page 12).
HOW TO SET UP THE CONSOLE The browser will open to the iFit.com registration page. Touch an entry box to view the keyboard. Slide your finger up or down the screen to scroll up or down the page. Before using the treadmill for the first time, set up the console. 1. Connect to your wireless network. Next, enter a username and password and your e-mail address. Enter the activation code from the iFit Live flier that came with the treadmill.
HOW TO USE THE MANUAL MODE Note: The first time you adjust the incline, you must first calibrate the incline system (see step 4 on page 22). For your safety, as you adjust the incline setting to negative levels, the maximum speed of the treadmill will decrease at set intervals. 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 14. Note: It may take a minute for the console to be ready for use. 5. Monitor your progress. 2. Select the main menu.
To measure your heart rate, stand on the foot rails and hold the pulse bar with your palms on the metal contacts for approximately ten seconds; avoid moving your hands. When your pulse is detected, your heart rate will be shown. For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds. The displays at the top of the screen can show two types of information. Touch each display until the display shows the desired information.
HOW TO USE AN ONBOARD WORKOUT If the speed or incline setting is too high or too low at any time during the workout, you can override the setting by pressing the Speed or Incline buttons; however, when the next segment begins, the treadmill will automatically adjust to the speed and incline settings for the next segment. 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 14. 2. Select an onboard workout.
HOW TO USE A SET-A-GOAL WORKOUT The workout will function in the same way as the manual mode (see pages 16 and 17). 1. Insert the key into the console. The workout will continue until you reach the goal that you set. The walking belt will then slow to a stop, and a workout summary will appear on the screen. After you view the workout summary, touch the Finish button to return to the main menu. You may also be able to either save or publish your results using one of the options on the screen.
HOW TO USE AN IFIT LIVE WORKOUT Before some workouts will download, you must add them to your schedule on iFit.com. Note: To use an iFit Live workout, you must have access to a wireless network (see HOW TO USE THE WIRELESS NETWORK MODE on page 23). An iFit Live account is also required. For more information about the iFit Live workouts, please see www.iFit.com. 2. Select the main menu. When you select an iFit Live workout, the screen will show the name, duration, and distance of the workout.
HOW TO USE THE EQUIPMENT SETTINGS MODE To turn on or turn off the display demo mode, first touch the Demo Mode button. Next, touch the On checkbox or the Off checkbox. Then, touch the back button on the screen. The console features an equipment settings mode that allows you to select a language and the unit of measurement, to turn on and turn off the display demo mode, and to enable or disable the key. 6. Enable or disable the key. 1. Select the settings main menu.
HOW TO USE THE MAINTENANCE MODE power switch into the off position. Wait for several seconds, and then press the power switch into the reset position. Note: It may take a few minutes for the console to be ready for use. The console features a maintenance mode that allows you to update the console firmware, calibrate the incline of the treadmill, calibrate the screen, view technical information, and view a button’s keycode. 4. Calibrate the incline system of the treadmill. 1.
HOW TO USE THE WIRELESS NETWORK MODE An information box will ask if you want to connect to the wireless network. Touch the Connect button to connect to the network or touch the Cancel button to return to the list of networks. If the network has a password, touch the password entry box. A keyboard will appear on the screen. To view the password as you type it, touch the Show Password checkbox. The console features a wireless network mode that allows you to set up a wireless network connection. 1.
HOW TO USE THE STEREO SOUND SYSTEM To enter a different web address in the URL bar, first, slide your finger down the screen to view the URL bar, if necessary. Then, touch the URL bar, use the keyboard to enter the address, and touch the Go button. To play music or audio books through the console’s speakers, you must connect your MP3 player, CD player, or other personal audio player to the console.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline to the lowest position before you fold the treadmill. Then, remove the key and unplug the power cord. It may be helpful to adjust the platform cushions to their highest or lowest settings (see page 24 to adjust the platform cushions). CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.
TROUBLESHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual. SYMPTOM: The console displays remain lit when you remove the key from the console a. The console features a display demo mode, designed to be used if the treadmill is displayed in a store. If the screen shows a demo presentation when you remove the key, the demo mode is turned on.
SYMPTOM: The walking belt slows when walked on Lower the treadmill (see HOW TO LOWER THE TREADMILL FOR USE on page 25). Remove the four indicated #8 x 3/4" Screws (1), and remove the Motor Hood (75). 75 1 a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 12. 1 b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE POWER CORD.
SYMPTOM: The walking belt is off-center or slips when walked on SYMPTOM: The iFit Live mode does not function correctly a. I f the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt.
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone.
PART LIST Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 50 6 1 1 4 10 8 2 2 2 1 18 1 4 2 6 2 2 12 2 2 2 5 15 4 8 1 4 4 4 1 1 4 4 1 1 4 2 1 4 1 2 4 4 1 1 2 2 1 1 Model No. EPTL14211.0 R0911A Description Key No. Qty.
Key No. Qty. 101 102 103 104 105 2 1 1 2 4 Description Key No. Qty. Wheel Right Base Cover Base Console Clamp Base Foot 106 107 108 * 1 2 1 – Description Console Base Console Ground Wire Console Plate User’s Manual Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual. *These parts are not illustrated.
15 12 48 1 18 12 41 70 47 38 12 1 12 71 44 42 24 43 15 49 46 12 69 45 1 38 12 72 12 14 42 12 51 18 50 43 53 24 12 68 52 1 1 1 12 1 54 17 20 56 47 12 59 73 24 58 1 55 35 30 57 21 12 67 24 34 60 23 17 10 65 66 51 1 61 1 16 48 12 14 24 62 55 54 1 56 20 21 24 34 30 64 24 52 1 57 23 34 30 63 EXPLODED DRAWING A Model No. EPTL14211.
EXPLODED DRAWING B Model No. EPTL14211.
EXPLODED DRAWING C Model No. EPTL14211.
EXPLODED DRAWING D Model No. EPTL14211.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual.
