Specifications

18 19

OWNER’S GUIDE | SPORT

OWNER’S GUIDE | FOLDING

SPORT

PARTS IDENTIFIER: BACK

Pulley

Storage Ring

Rail Incline

Release

Handle

Foot Holder

Removal Pull Pins

Foot Holder

Lowering Lever

Transport Handle

Detent Pin

Transport Wheels

Rail Fold Latch

Glideboard “D” Ring

Not Visible

Squat Fold Pull Pin

Index Pin

Plate

Rail Lock

Tower Cross

arm

Before folding, move the unit away from a wall or window because the tower will lean

back.

1. If LAT bars are installed on your model Total Gym

, move the pulleys to the upper

outside position as shown.

2. Remove the center pulley from the glideboard and hang it on the pulley storage ring

on the back of the tower transport handle.

3. Remove or fold down the squat stand against the glideboard by pulling the

squat fold pull pin on the left side of the lower rail while facing the tower.

4. Remove the folding foot holder and hook it on the back of the squat stand.

5. Lower the rails to lowest position “F.”

Folding