Specifications
36 37
OWNER’S GUIDE | OPTIONAL ACCESSORIES OWNER’S GUIDE | MAINTENANCE AND CARE
MAINTENANCE
ACCESSORIES
Press Bar
3Grip Pull-up Bar
Dip Bar
Optional Accessories Purchased Separately: Observe the instructions provided with each accessory.
SCRUNCH
®
Weight Bar
Leg Pulley System
Toe Bar
Standing Platform
GRAVITY
®
Gripper
Wooden Dowel
Support Wedge Pillow
Your Total Gym
®
model will offer you or your facility and your clientele years of easy
operation if you follow these simple tips for maintenance and care. With periodic
cleaning, moving parts and rolling surfaces will maintain their smooth function. Use
alcohol and a waterless cleaning solution on parts to keep your Total Gym looking its
best and to prevent dust build-up. Clean rail surfaces on a regular basis with a non-
corrosive cleaner like soap and water. Some black powder residue is normal, especially
on the bottom rails.
Note: Total Gym incline trainers have some functional moving parts that, by design, slide
over painted parts and may eventually wear off the paint (i.e., hinge lock on rails and pull
pin on LAT Bars). Normal frequent use will prevent corrosion in those areas. Apply clear
grease to these painted areas for extra protection in high-humidity environments or for
long-term storage.
Caution! DO NOT USE ANY LUBRICANTS OR SILICONE-BASED PRODUCTS on the rails
or wheels. This will cause the wheels to slide rather than roll and will damage the wheels.
You may use lubricant on the folding hinges when needed. When lubricating these parts,
remove any residue of lubricant from the cables, rails or wheel surfaces. Clean the
glideboard material with a non oil-based window cleaner. DO NOT USE ARMOR ALL
®
OR
LIKE SUBSTANCES. These will make the glideboard slippery. Wipe down your Total Gym
with a clean cloth.
MAINTENANCE SCHEDULE
DAILY
1. Wipe down all padded surfaces with antibacterial cleanser after each use.
2. Move the glideboard up and down rails to ensure smooth rolling. If glideboard
does not roll smoothly, clean rails and wheels thoroughly.
Maintenance and Care
WEEKLY
1. Inspect all cables for wear or damage. Replace damaged cables.
2. Wipe down rails with a non-corrosive cleanser.
3. Clean all surface areas for aesthetics.
4. Check all screws, fasteners and knobs to ensure they are installed correctly
and tightened.
5. Check for ease of use when changing levels. Report any difficulty in changing
levels.
6. Visually and functionally check all pulleys for smooth operation. Clean as
needed.
7. Check all pads, fabric or foam for wear and replace as needed.
a. Foot holder pads
b. Glideboard upholstery
c. Pulley handles
MONTHLY
1. Remove glideboard for visual inspection of wheels. Clean any debris
accumulated on the wheel assembly.
2. Inspect rubber stoppers.
3. Visually inspect glideboard for tearing or punctures.
4. Check all additional accessories for proper function and wear.
5. Replace all parts that show signs of wear. Contact Customer Service in USA at
858-586-6080 or contact the approved distributor in your country.