www.epicfit.com Model No. EPEL16912.2 Serial No. Write the serial number in the space above for reference. Serial Number Decal (on underside of frame) ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to www.epicfit.com/registration. CUSTOMER CARE For service at any time, go to www.epicfit.com. Chat: Mon.–Fri. 6 a.m.–7 p.m. MT Email: productsupport@epicfit.com Call: 1-855-EPIC-FIT (1-855-374-2348) Mon.–Fri. 6 a.m.–7 p.m. MT Please do not contact the store.
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on the elliptical before using the elliptical. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. It is the responsibility of the owner to ensure that all users of the elliptical are adequately informed of all precautions. is not working properly.
BEFORE YOU BEGIN Thank you for selecting the revolutionary EPIC™ A35E elliptical. The A35E elliptical provides an impressive selection of features designed to make your workouts at home more effective and enjoyable. manual. To help us assist you, note the product model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual. For your benet, read this manual carefully before you use the elliptical.
PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. Extra parts may be included.
ASSEMBLY • To watch an assembly video, go to http://productvideo.co/ assembly/dsg/epic or use your mobile phone or smartphone to read the QR code at the right. • Left parts are marked “L” or “Left” and right parts are marked “R” or “Right.” • To identify small parts, see page 6. • In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver • Assembly requires two persons.
3. Set the Rear Stabilizer (5) on the floor behind the Frame (1). Locate the wire tie in the Rear Stabilizer. 3 See the inset drawing. Tie the end of the wire tie to the Sensor Wire Harness (155). Pull the other end of the wire tie until the Sensor Wire Harness (155) is routed through the Rear Stabilizer (5). 1 Wire Tie 5 155 Wire Tie 155 Wire Tie 4. Tip: Avoid pinching the Sensor Wire Harness (155).
6. Identify the Lower Upright Cover (80), which has a large oval hole in it. 6 Orient the Lower Upright Cover (80), the Shield Cover (75), and the Upright (4) as shown. Slide the Lower Upright Cover and the Shield Cover upward onto the Upright. 4 80 75 7. While a second person holds the Upright (4) near the Frame (1), locate the wire tie in the Upright. 7 Wire Tie Wire Tie See the inset drawing. Tie the lower end of the wire tie to the Main Wire Harness (110).
8. Tip: Avoid pinching the Main Wire Harness (110). 8 110 Slide the Upright (4) onto the Frame (1). Attach the Upright with seven M8 x 16mm Screws (72); do not fully tighten the Screws yet. Avoid pinching the Main Wire Harness (110) Do not press the Shield Cover (75) into place yet. 4 75 72 72 72 1 9. Identify the Right Pedal (49) and the Right Pedal Arm (58) and orient them as shown.
10. Using a plastic bag to keep your fingers clean, apply a generous amount of the included grease to the Arm Axle (35) and to two Wave Washers (95). 10 Grease 72 95 98 Insert the Arm Axle (35) into the Upright (4) and center it. Then, slide a Wave Washer (95) onto each end of the Arm Axle. 35 46 95 36 98 With the help of a second person, slide the Right Upper Body Leg (36) onto the right side of the Arm Axle (35).
. Tip: Avoid pinching the wires in the Right and Left Handlebars (83, 87). 12 62 Attach the Right Handlebar (83) to the right side of the Console Bracket (62) with three M8 x 16mm Screws (72). 87 83 Repeat this step with the Left Handlebar (87). Then, remove the packaging from the wires on the Right and Left Handlebars (83, 87). 72 Avoid pinching the wires 13. Slide the Right Upper Body Arm (61) onto the Right Upper Body Leg (36).
14. Have a second person hold the Console (7) near the Console Bracket (62). 14 7 Connect the Ground Wire (119) to the matching wire on the Console (7). Then, insert all of the wires on the Console downward through the indicated hole in the Console Bracket (62). Avoid pinching the wires 119 Tip: Avoid pinching the wires. Attach the Console (7) to the Console Bracket (62) with four M4 x 16mm Screws (104). 62 104 See the inset drawing.
16. Slide the Lower Upright Cover (80) upward, and attach it to the Upright (4) with two M4 x 16mm Screws (104). 16 4 80 104 17. Attach the Accessory Tray Base (8) to the Upright (4) with two M4 x 16mm Screws (104). 17 8 4 104 18. See the left drawing. Locate the receiver in the Accessory Tray Base (8). Insert the wire on the receiver into the indicated hole in the Lower Upright Cover (80). 18 See the right drawing.
19. Press the Accessory Tray (37) into the Accessory Tray Base (8). 19 37 8 20. Press the Upper Upright Cover (91) onto the Lower Upright Cover (80).
21. Identify the Right Arm Upper Cover (67) and the Right Arm Lower Cover (68). 21 Attach the Right Arm Upper Cover (67) to the Right Upper Body Leg (36) with an M4 x 16mm Screw (104). Then, press the Right Arm Lower Cover (68) onto the Right Arm Upper Cover (67). 67 Attach the Left Arm Upper Cover (not shown) and the Left Arm Lower Cover (not shown) in the same way. 36 104 68 22. See step 8. Tighten the M8 x 16mm Screws (72).
23. While a second person tips the elliptical to the left and holds it, attach a Stabilizer Cap (134) to the right side of the Frame (1) with two M4 x 16mm Screws (104). 23 Next, tighten a Leveling Foot (92) into the Frame (1) in the indicated location. Repeat this step on the left side of the elliptical. 134 1 92 104 24. Make sure that all parts are properly tightened before you use the elliptical. Note: Extra parts may be included. Place a mat beneath the elliptical to protect the floor.
THE CHEST HEART RATE MONITOR HOW TO PUT ON THE HEART RATE MONITOR The heart rate monitor consists of a chest strap and a sensor. Insert the tab on one end of the chest strap into the hole in one end of the sensor as shown. Then, press the end of the sensor under the buckle on the chest strap. The tab should be flush with the front of the sensor.
HOW TO USE THE ELLIPTICAL HOW TO PLUG IN THE POWER CORD A temporary adapter may be used to connect the power cord to a 2-pole receptacle as shown at the right if a properly grounded outlet is not available. This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. The power cord has a plug with a grounding pin.
HOW TO MOVE THE ELLIPTICAL HOW TO ADJUST THE POSITIONS OF THE PEDALS Due to the size and weight of the elliptical, moving it requires two persons. Stand in front of the elliptical, hold the upright, and place one foot against one of the wheels. Pull on the upright and have a second person lift the rear stabilizer until the elliptical will roll on the wheels. Carefully move the elliptical to the desired location, and then lower it to the oor. Each pedal can be adjusted to several positions.
HOW TO LEVEL THE ELLIPTICAL HOW TO EXERCISE ON THE ELLIPTICAL If the elliptical rocks slightly on your floor during use, turn one or both of the leveling feet beneath the rear stabilizer until the rocking motion is eliminated. Then, turn the leveling feet beneath the center stabilizer until the leveling feet touch your floor. To mount the elliptical, hold the upper body arms or the handlebars and step onto the pedal that is in the lower position. Then, step onto the other pedal.
CONSOLE DIAGRAM FEATURES OF THE CONSOLE as it guides you through an effective workout. You can also set a time, distance, calorie, or rpm goal. Several iFit demo workouts are also included. The advanced console offers an array of features designed to make your workouts more effective and enjoyable. When you use the manual mode of the console, you can change the resistance of the pedals and the incline of the ramp with the touch of a button.
HOW TO TURN ON THE POWER HOW TO USE THE TOUCH SCREEN IMPORTANT: If the elliptical has been exposed to cold temperatures, allow it to warm to room temperature before you turn on the power. If you do not do this, you may damage the console displays or other electrical components. The console features a tablet with a full-color touch screen. The following information will help you become familiar with the device’s advanced technology: Plug in the power cord (see HOW TO PLUG IN THE POWER CORD on page 19).
HOW TO SET UP THE CONSOLE The browser will open to the iFit.com home page. Touch the Join iFit button in the upper-right corner of the screen. Before using the elliptical for the first time, set up the console. The Internet browser will open to the iFit.com account creation page. Then, fill in the information fields on the screen to create your iFit account. 1. Connect to your wireless network.
HOW TO USE THE MANUAL MODE 4. Follow your progress. 1. Touch the screen or press any button on the console to turn on the console. The console offers several display modes. The display mode that you select will determine which workout information is shown. See HOW TO TURN ON THE POWER on page 23. To select the desired display mode, simply flick or slide the screen. You can also view additional workout information by touching the red boxes on the screen. 2. Select the main menu.
5. Measure your heart rate if desired. If the display does not show your heart rate, make sure that your hands are positioned as described. Be careful not to move your hands excessively or to squeeze the contacts tightly. For optimal performance, clean the contacts using a soft cloth; never use alcohol, abrasives, or chemicals to clean the contacts. To use the chest heart rate monitor, see page 18. To use the handgrip heart rate monitor, follow the instructions below.
HOW TO USE AN ONBOARD WORKOUT If the resistance level or incline level for the current segment is too high or too low, you can manually override the setting by pressing the Quick Resistance buttons or the Quick Ramp buttons. IMPORTANT: When the current segment of the workout ends, the pedals will automatically adjust to the resistance level programmed for the next segment and the ramp will automatically adjust to the incline level programmed for the next segment. 1.
HOW TO USE A SET-A-GOAL WORKOUT The workout will continue until you reach the goal that you set. A workout summary will appear on the screen. After you view the workout summary, touch the Finish button to return to the main menu. You may also be able to either save or publish your results using one of the options on the screen. 1. Touch the screen or press any button on the console to turn on the console. See HOW TO TURN ON THE POWER on page 23.
HOW TO USE AN IFIT WORKOUT For more information about the iFit workouts, please see www.iFit.com. Note: To use an iFit workout, you must have access to a wireless network (see HOW TO USE THE WIRELESS NETWORK MODE on page 32). An iFit account is also required. When you select an iFit workout, the screen will show the name, duration, and distance of the workout. The screen will also show the approximate number of calories you will burn during the workout.
HOW TO USE THE EQUIPMENT SETTINGS MODE Note: If a passcode is enabled, the console will regularly ask for you to enter the passcode. The console will remain locked until the correct passcode is entered. IMPORTANT: If you forget your passcode, enter the following master passcode to unlock the console: 1985. 1. Select the settings main menu. Turn on the console and select the main menu (see steps 1 and 2 on page 25). Then, touch the gears button at the bottom of the screen to select the settings main menu.
12. Enable or disable street view. The screen will show the progress of the update. When the update is complete, the elliptical will turn off and then turn back on. If it does not, press the power switch into the off position. Wait for several seconds, and then press the power switch into the reset position. Note: It may take a few minutes for the console to be ready for use. During some workouts, the screen may show a map.
HOW TO USE THE WIRELESS NETWORK MODE An information box will ask if you want to connect to the wireless network. Touch the Connect button to connect to the network or touch the Cancel button to return to the list of networks. If the network has a password, touch the password entry box. A keyboard will appear on the screen. To view the password as you type it, touch the Show Password checkbox. The console features a wireless network mode that allows you to set up a wireless network connection. 1.
HOW TO USE THE SOUND SYSTEM HOW TO USE THE INTERNET BROWSER To play music or audio books through the console sound system, you must connect your MP3 player, CD player, or other personal audio player to the console. Note: To use the Internet browser, you must have access to a wireless network including a wireless router (802.11b/g/n) with SSID broadcast enabled (hidden networks are not supported). Plug one end of your audio wire into the audio jack on the console.
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15C and part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
MAINTENANCE AND TROUBLESHOOTING IMPORTANT: Servicing other than the procedures described below should be performed only by an authorized service representative. Next, see EXPLODED DRAWING A on page 41 and EXPLODED DRAWING B on page 42. Remove the M8 x 16mm Screw (72), the Axle Cover (53), and the M8 x 25mm Washer (149) from the upper end of the Right Roller Arm (45). Then, remove the Right Roller Arm from the right Crank Arm (20). Set the Right Roller Arm out of the way.
HOW TO ADJUST THE REED SWITCH Loosen, but do not remove, the two M4 x 16mm Screws (104). Slide the Reed Switch (38) slightly closer to or away from the Magnet (43). Then, retighten the Screws. Plug in the power cord and press the power switch to the reset position. Turn the left Crank Arm (20) for a moment. If the console does not display correct feedback, the reed switch should be adjusted. Press the power switch to the off position and unplug the power cord.
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone.
SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch; never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Hamstrings, back of knees and back. 1 2. Hamstring Stretch Sit with one leg extended.
PART LIST Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 2 2 1 2 2 1 4 2 1 1 4 1 2 4 2 1 1 1 1 1 2 2 1 2 1 1 1 1 2 1 1 Model No. EPEL16912.2 R0113A Description Key No. Qty.
Key No. Qty. 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 1 4 1 53 2 1 4 2 1 1 1 1 1 2 4 2 14 1 1 4 9 2 1 1 2 1 11 2 2 1 2 2 4 6 Description Key No. Qty. Idler Screw M8 Locknut Ultrasonic Sensor Bracket M4 x 16mm Screw M8 x 16mm Hex Screw Small Pulley Spacer Large Standoff M6 Small Washer M6 Large Washer Main Wire Harness Large Pulley Spacer Power Cord Drive Belt M2.
104 134 147 127 127 115 26 92 5 103 127 11 26 114 9 10 3 92 117 127 2 92 134 104 98 134 155 72 72 65 30 94 13 15 40 72 131 132 97 28 32 159 106 125 108 78 20 85 104 27 131 86 150 99 124 115 105 31 32 107 98 30 1 72 159 104 108 125 29 104 92 38 39 25 118 104 93 134 88 22 94 89 113 109 101 132 43 102 6 99 111 151 104 23 86 43 34 20 18 112 42 16 17 102 129 23 157 104 40 104 134 116 85 150 120 78 134 151 19
142 144 33 72 98 148 152 141 47 98 70 72 41 48 96 72 57 140 144 24 55 94 104 54 135 158 53 44 21 57 46 95 145 70 12 99 82 137 57 98 72 98 72 72 51 21 104 137 72 59 104 121 53 136 51 148 33 57 98 104 137 59 104 90 14 149 33 57 143 148 133 133 90 139 137 53 90 138 144 145 121 57 95 58 72 24 98 104 136 82 72 72 98 137 53 70 67 99 59 137 96 104 72 36 148 33 72 57 59 53 149 68 94 104 61 133 70 142 152 98
104 104 71 43 76 127 123 121 64 52 79 117 77 7 104 100 104 127 73 50 154 156 100 153 126 117 62 72 104 156 117 104 37 104 119 74 146 87 117 8 104 72 98 81 104 80 72 60 128 122 104 100 69 104 35 100 30 71 56 75 72 4 122 128 104 72 104 98 66 30 63 104 110 91 130 83 72 EXPLODED DRAWING C Model No. EPEL16912.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual.