Owner's Manual

8
2. Identify the Right Upright (74).
Have a second person hold the Right Upright
(
74) near the Right Base Cover (77). See the
inset drawing. Tie the wire tie in the lower end
o
f the Right Upright securely around the end of
the Upright Wire Harness (75). Then, pull the
other end of the wire tie up through the top of
the Right Upright until the Upright Wire Harness
is routed completely through the Right Upright.
Gently pull up on the Upright Wire Harness (75)
as you set the Right Upright (74) on the Base
(83) inside the Right Base Cover (77). Be care-
ful not to pinch the Upright Wire Harness.
Partially attach the Right Upright (74) to the
Base (83) with two 3/8” x 3 3/4” Bolts (72) and
two 3/8" Star Washers (90). Note: It may be
necessary to tip the top of the Right Upright for-
ward slightly as you thread the Bolts into it. Do
not tighten the Bolts yet.
83
75
77
2
74
90
72
75
74
Wire
Tie
3. Have a second person hold the Left Upright (73)
near the Left Base Cover (76). See the inset
drawing. Tie the wire tie in the Left Upright se-
curely around the end of the TV Cable (49) and
the AV Cable (97). Then, pull the other end of
the wire tie up through the top of the Left Upright
until the TV Cable and the AV Cable are routed
completely through the Left Upright.
Gently pull up on the TV Cable (49) and the AV
Cable (97) as you set the Left Upright (73) on
the Base (83) inside the Left Base Cover (76).
Be careful not to pinch the Cables.
Partially attach the Left Upright (73) to the Base
(83) with two 3/8” x 3 3/4” Bolts (72) and two
3/8" Star Washers (90). Note: It may be neces-
sary to tip the top of the Left Upright forward
slightly as you thread the Bolts into it. Do not
tighten the Bolts yet.
With the help of a second person, lower the
treadmill off the cardboard stand. Save the card-
board stand for step 9.
83
76
3
73
49
97
90
72
49, 97
73
Wire
Tie
Wire
Tie
Wire
Tie