Owner's Manual

9
4. Identify the Right Upright Sleeve (96) and the
Left Upright Sleeve (95); the Upright Sleeves
are labeled “Right” and “Left”. Slide the Right
U
pright Sleeve onto the Right Upright (74) and
the Left Upright Sleeve onto the Left Upright
(
73).
95
“Right”
“Left”
96
4
74
73
5. Have a second person hold the console assem-
bly near the Uprights (73, 74).
Connect the Upright Wire Harness (75) to the
Console Wire Harness (71). See the inset
drawing. The connectors should slide to-
gether easily and snap into place. If they do
not, turn one connector and try again. IF THE
CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN THE POWER IS TURNED ON.
Remove the wire tie from the Upright Wire
Harness. Insert the connectors down into the
Right Upright (74).
71
Console
Assembly
5
75
74
75
73
Wire
Tie
71