Model No. GZFW2185.0 Serial No. Write the serial number in the space above for future reference. Serial Number Decal OWNER’S MANUAL QUESTIONS? At FreeMotion Fitness, we are committed to providing complete customer satisfaction. If you have questions, see HOW TO CONTACT CUSTOMER CARE on the back cover of this manual. CAUTION Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Visit our website at www.freemotionfitness.
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ASSEMBLY . . . . . . . . . . . . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read the following important precautions before using the strength machine. 1. Read all instructions in this manual before using the strength machine. Use the strength machine only as described in this manual. 7. Keep children under 12 and pets away from the strength machine at all times. 8. Always wear athletic shoes for foot protection while exercising. 2.
WARNING DECAL PLACEMENT The decals shown below have been placed on the strength machine in the locations shown. If a decal is missing or illegible, see HOW TO CONTACT CUSTOMER CARE on the back cover of this manual. Apply the decal in the location shown.
BEFORE YOU BEGIN after reading this manual, see HOW TO CONTACT CUSTOMER CARE on the back cover of this manual. To help us assist you, please note the product model number and serial number before calling. The model number is GZFW2185.0. The serial number can be found on a decal attached to the strength machine (see the front cover of this manual). Thank you for selecting the EPIC STRENGTH® PLATE LOADED LEG PRESS strength machine.
ASSEMBLY Make Things Easier for Yourself • Tighten all parts as you assemble them, unless instructed to do otherwise. Everything in this manual is designed to ensure that the strength machine can be assembled successfully by anyone. • As you assemble the strength machine, make sure all parts are oriented as shown in the drawings.
3. Orient the Seat Frame (2) as shown and set the Seat Frame on the Base (1). Attach the Seat Frame to the Base with four 1/2" x 2" Screws (40) and two 1/2" Nylon Locknuts (27). 3 40 40 40 2 27 1 4. Remove the two 3/8" x 3" Screws (39) from the Left Base Leg (16). Attach the Left Base Leg to the Base (1) with the two Screws. 4 Repeat this step with the Right Base Leg (20). 16 1 39 20 5. Remove the 1/2" x 2" Screw (40) from a Weight Bar (13).
6. Remove the indicated 3/8" x 3/8" Shoulder Bolt (52) from the Support Arm (7). Make sure that the 3/8" Nylon Washer (50) is between the Support Arm (7) and the Adjustment Arm (10), and that the 3/8" Bushing (51) is pressed into the Support Arm. Attach the Support Arm to the Adjustment Arm with the 3/8" x 3/8" Shoulder Bolt (52). 7 50 10 7. Make sure that all parts are properly tightened.
ADJUSTMENTS This section explains how to adjust the strength machine for exercising. Make sure all parts are properly tightened each time the strength machine is used. Replace any worn parts immediately. ADDING WEIGHTS TO THE WEIGHT ARM 13 To add resistance to your workout, slide an equal amount of weight (not included) onto each Weight Bar (13). Make sure that the weights are pushed against the Bumper Rings (37). 37 WARNING: Do not place more than 450 pounds on each Weight Bar (13).
MAINTENANCE For safe and trouble-free operation of your EPIC STRENGTH strength equipment, it is important to perform preventive maintenance on a regular basis. Make sure that all parts are properly tightened each time the strength machine is used. Replace any worn parts immediately. The strength machine can be cleaned with a cloth dampened with water and a mild, non-abrasive soap. Do not use solvents. Note: Instruct all personnel to perform equipment inspection and maintenance requirements.
CUSHION ATTACHMENT Important: All EPIC STRENGTH cushions are fabricated using dense plywood with tee-nuts installed for bolting to the machine framework. Because these teenuts are held by the plywood, they will not withstand the torque that standard nuts and bolts will. Therefore, when tightening the cushion bolts, turn them only until they are snug and the cushion does not move or feel loose. Overtightening may strip the tee-nuts from the plywood and make it impossible to remove the cushion in the future.
PART LIST—Model No. GZFW2185.0 Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 1 2 1 3 5 2 1 1 1 8 8 Description Key No. Qty.
EXPLODED DRAWING—Model No. GZFW2185.
WARRANTY TERMS AND CONDITIONS Limited Warranty on Commercial Equipment FreeMotion Fitness, Inc. warrants that all new equipment will be free of manufacturing defects in workmanship and materials, becoming effective at the date of original installation. Parts repaired or replaced under the terms of this warranty will be warranted for the remainder of the original warranty period only.
Your Responsibility Retain proof of purchase; use, operate, and maintain the Product as specified in the Owner’s Manual; notify Customer Care of any defect within 10 days after discovery of the defect; if instructed, return any defective part for replacement, or, if necessary, the entire Product for repair. Owner’s Manual It is very important that you read the Manual before operating the Product.
HOW TO CONTACT CUSTOMER CARE If you have questions after reading this manual, or if you require assistance, please contact Customer Care at the address and phone number listed below. Please be prepared to give the following information: • The MODEL NUMBER of the product (GZFW2185.0). • The NAME of the product (EPIC STRENGTH PLATE LOADED LEG PRESS strength machine). • The SERIAL NUMBER of the product (see the front cover of this manual).
