Owner's Manual

7
3. Orient the Seat Frame (2) as shown and set the
Seat Frame on the Base (1). Attach the Seat
F
rame to the Base with four 1/2" x 2" Screws (40)
and two 1/2" Nylon Locknuts (27).
4. Remove the two 3/8" x 3" Screws (39) from the
Left Base Leg (16). Attach the Left Base Leg to
the Base (1) with the two Screws.
Repeat this step with the Right Base Leg (20).
5.
Remove the 1/2" x 2" Screw (40) from a Weight
Bar (13). Attach the Weight Bar to the Foot Plate
Frame (4) with the Screw. Slide a Bumper Ring
(37) onto the Weight Bar.
Repeat this step with the other Weight Bar (13).
2
27
1
40
40
3
40
4
16
5
1
39
20
13
37
40
4