User Manual

ZENMUSE X5S

User Manual

Take o from at, open ground and protect the gimbal at all times.

320°

20°

-320°

-20°

40°

-130°

0°

Ground Level

Mechanical Range

The 3-axis gimbal provides an incredibly stable and mobile platform for the camera system

to capture completely smooth images and videos. The gimbal can tilt the camera up to 170

degrees, pan 320 degrees and roll 20 degrees in either direction.

Using the Remote Controller

Press the Shutter Button to capture photos or the Record Button to record videos. Adjust the

camera's tilt using the left dial. Turn the right dial to adjust camera settings.

1. Left Dial

Scroll this dial to control tilt the gimbal. Scroll

this dial while pressing the C1 to control yaw

the gimbal; Scroll this dial while pressing C2

to control tilt the FPV camera.

2. Recording Button

Press once to start video recording. Press

again to stop recording.

3. Shutter Button

Press to take a photo. If burst mode is

selected, the set number of photos will

be taken with one press.

4. Intelligent Flight Pause Button

Press once to exit from TapFly

ActiveTrack

and Advanced modes.

5. Right Dial

Press once and then scroll to set camera

settings. Re-active this function after 10s

free of operation.

6. C2 Button

Set in DJI GO 4 app.

7. C1 Button

Set in DJI GO 4 app.